The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Upgrading GPU in Aspire 7535g?

    Discussion in 'Acer' started by nayfeee, Dec 8, 2011.

  1. nayfeee

    nayfeee Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    Hi guys,

    Just wondering if it is possible to remove the ATI Mobility Radeon HD 4570 and replace it with a larger/better GPU?

    I've taken the laptop apart and had a look around inside, but lost my nerve and decided to do more research before messing around with it.

    Cheers :)
     
  2. nayfeee

    nayfeee Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    Ive not managed to fully get the back off my laptop yet, got the panels off but the casing itself is a little tricky, especially as I am wary about damaging it.

    However, it does look as though the GPU is simply screwed in and not soldered, is this a good sign perhaps. Any advice would be appreciated.



    EDIT- Got the laptop apart, the GPU is screwed to the MB and slots into it. Does this mean it can be replaced/upgraded?
     
  3. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    9,431
    Messages:
    58,194
    Likes Received:
    17,901
    Trophy Points:
    931
    Hey there, you have a range of upgrades to choose from. All of the following are MXM-A modules (MXM-B or MXM II modules are not compatible for instance).

    First level:
    GT240M or HD4670 (DDR3)

    Second level:
    GTS250M or HD5730

    Third level:
    HD6770M

    Comparing the radeon cards:

    4570: (yours) 80 shaders, 64bit DDR2 (maybe DDR3) (DX10)
    4670: 320 shaders, 128bit DDR3 (avoid DDR2) (DX10)
    5730: 400 shaders, 128bit DDR3 (DX11)
    6770: 480 shaders, 128bit GDDR5 (DX11)
     
  4. nayfeee

    nayfeee Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    Thank you Meaker :D

    Is it really as simple as just disassembly, removal of previous GPU and installation of new?

    Obviously the copper hs will need to be removed and re-attached as well, is this a tricky job?

    Also, i feel it will be hard to find a local or online place to buy laptop GPU?
     
  5. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    9,431
    Messages:
    58,194
    Likes Received:
    17,901
    Trophy Points:
    931
    Usually replacement involves removing the heatsink (4 screws if CPU/GPU cooling is two modules, 7/8 if all one), the two screws holding down the module and putting the new card in and reversing the process. It's a good time to use a quality thermal paste to ensure the best contact (I find that arctic silver MX-4 is cheap and is very easy to apply).

    The power circuitry on these cards is very similar so difference in layout are not that important.

    They can be tricky to source and be careful who and where you get them from but they are around (ebay sellers with a lot of trust can be a good place to start for this level of card).

    Also feel free to email me as I might give you a good offer on a couple of spare ones I have lying around.
     
  6. nayfeee

    nayfeee Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    Thanks again mate, will contact you about the ones you have.

    Can't seem to figure out how to message you, and your e-mail isn't on your profile. PM me if you can as I'm interested in what you have lying around.