The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    acer aspire 5920g - DMA failure

    Discussion in 'Acer' started by nico.viola, Sep 1, 2013.

  1. nico.viola

    nico.viola Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    hi all,
    my acer aspire 5920g is stopping on boot whit black screen and it does 1 beep, then 2 other beeps, then 2 others beeps; on phoenix beep codes page i found :
    "1-2-2 DMA failure The DMA controller has failed. Replace the IC if possible"

    Actually what i shoul'd do? What actually means 'replace the interrupt controller'?

    thanx.

    p.s. sorry for my poor english
     
    nico.viola, Sep 1, 2013
    #1