The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    help with my 3830TG

    Discussion in 'Acer' started by reflex99, Sep 4, 2011.

  1. reflex99

    reflex99 Notebook Guru

    Reputations:
    0
    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    15
    So guys, i could kinda use some help.

    I replaced the TIM today, and now i have problem.

    When i push the power button, the light turns on for like 1 second, then turns off. Nothing else happens. Also the battery indicator light turns on, at the same time as the power light. Once the power button LED turns off, the battery indicator flashes red twice.

    Any thoughts? I already went back and checked the cables, everything seems to be hooked up ok.
     
  2. greatpolaris

    greatpolaris Notebook Enthusiast

    Reputations:
    5
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    are you still using the same stock cpu?
     
  3. reflex99

    reflex99 Notebook Guru

    Reputations:
    0
    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    15
    yes

    /tenchar
     
  4. greatpolaris

    greatpolaris Notebook Enthusiast

    Reputations:
    5
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    I hate to say this, but reconnect everything again you might be missing a cable somewhere =/
     
  5. reflex99

    reflex99 Notebook Guru

    Reputations:
    0
    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    15
    done this three times...

    starting to suspect static elec. got it