How to run 9.3 on the M17 (Vista & W7)

Dammit Cool, I apologize. I may have, and likely, edited the inf with 4k support and accidentally uploaded it. I'll upload the other tonight.

Edit: I'll try from work if not blocked by a firewall.

 

dang E these thing are really a thorn in the side .....

 

Look what CooL is trying to get running

He (still) has 32bit AND the scaling issu^^ So, NO there isn't a solution for 32bit and m17^^

Greetings
Julian

 

What the heck?

 

LOL. I know there is a page past 15 but I can't access it! I just see up to 15. And the last page link sticks me at 15. Odd. I can't even see my posts.

 

Wow. Finally. That was odd.

 

Yes the issu is gone ... don't know why ...

Greetings
Julian and good night^^

 

Lol what an odd bug

 

Grr... cool, try once more please? http://ewrecked.darksmileysystems.com/32bittweaks.zip

 

Good and bad news. You can install these drivers the old way. Download the whole ATI package, modify the files and drop the infs in the correct folder. Display driver AND CCC will both install correctly. But the scaling issue is still there

 

cool can you just get 64 bit alread gahhhhh

 

As soon as they merge those 32bit and 64bit program files im really picky

 

I don't think they can? Otherwise everybody had to download both versions which are included in one^^ Woudn't be clever

Greetings
Julian

 

i got everything except ccc installed.

 

Which CCC version have you tryed?

As I posted I had to try 3 to 4 different versions untill it worked^^

Greetings
Julian

Edit: rumors say the new AW2 driver will give you the ccc you need^^

 

the one on the first page. but i think the ccc is the performance and bug fixes that is why i am trying install them. i have to other ones from different websites i am going to try and i will let you know the results

 

ok i got it from my first website.
http://www.tweakforce.com/

they are alittle late with the drivers. but ccc installed. not the driver though because they did not put int the mobile codes

 

Nice so it's time to bench!

Greetings
Julian

 

i don't like that driver. i got 27fps average on fc2 and with my old driver i got 47fps. i dont have 3dmark06 installed right now. but i have dmc4 and crysis and fc2 right now.

 

Hm are you sure you use the same options? This doesn't sound good^^

Greetings
Julian

 

yeah i did. and it didnt work.

 

ok i cannot get this inf to work i use the have disk method and i get data is invalid

 

Try the others There are more than one just in case

Ah btw the "non scaling" inf. do scal up to 1440x900 (so it's enought for us)

Greetings
Julian

 

Ok so in the catalyst control it states the version is 09.3...does this mean the driver update worked? My driver version in decive manager under display states 8.570.0.0 which makes me think it did not work!! Please help!!

 

You are right you only have the ccc from 9.3 but may be you can install the "driver part" after ccc^^ try it out

The picture shows you how it looks on W7^^ (but the drivernumber is equal on Vista and W7)

Just go to devicemanager an retry the "have disk" method (pictured guid on page 1)

Greetings
Julian

 

Ok so which one of these do I use or do I need to use both? C7_77072.inf or CH_76829.inf It states that I now have 8.591.0.0 but like where yours says E-wrecked Bored Mod v3...mine states Ati Technologies Inc. What have I done wrong... I did replace the driver with the C7_77072,inf like the first page of this but my still reads ATI not e-wrecked!!

 

Ok so now I have it where it states e-wrecked bored mod v3 and 8.591.0.0 but now I have no CCC like in the first page of this but I am unclear how to reintall it? Do I have to replace the C7_77072.inf again or what!! Please help!!

I tried to intall CCC through the C:ATi/..../setup.exe and it goes throught the install and I reboot and then nothing I get this error!!

Could not load file or assembly 'MOM.Implementatation' or one of its dependencies. The system cannot find the file specified.


This is an ATI Error

 

You will need to download tha stand alone CCC, sometimes 9.3 ccc works (e.g. for MR:Moo) but normaly you need the stand alone CCC (you can find it where you found the full driver) of the version which run perfectly on your system.

Greetings
Julian

 

The way i did it and it work (have in mind that for me there was still a scaling issue after i did the installation) is to download the full package. Mod them with mobility modder, then replace the two infs with E's ones.

After that run the setup.exe and do a custom installation, that way its easy to see if it will allow you to install ccc or not depending if its on the list.

Using that steps i managed to install 9.3 and CCC without using two different installers or standalone setups. Just wish there was a way to fix the scaling problem

 

I must be doing something wrong because I am not allowed to install a new ccc...what I get is the catalyst install manager and the catalyst registration...no ccc...I have downloaded 9.2 and 9.3 and it does not seem to load the ccc or give me that option!!

 

Did you mod the files with mobility modder ? If you did and it still doesnt work you can always download the E's 9.1 drivers and install only the CCC from that package.

 

Sorry new at this what do I need to mod...I got it where it states e-wrecked bored mod v3 and 8.591.0.0 in device driver but now I can't get CCC reinstalled...I may be missing something here but I have no ATI programs at all and I can't seem to get them installed!!

 

I guess I don't get how to install the CCC after I have installed the driver in device manager...instructions on first page as to install CCC is very vauge. I have tried many different versions and none give me the option to install the CCC.

 

Download the newest package from ATI's web site. Extract them in c:\ati. Download and install mobility modder. Run mobility modder and choose the folder in c:\ati. Give it half a minute to modify the files. After that download the modded .inf E made and replace the .infs.

After that just run the setup and check if you can install CCC.

You can always download http://ewrecked.darksmileysystems.com/E-wrecked9_1_32bitVista.zip and install only the CCC from it without following the above steps since those files are already modded (if you are running 32bit).

 

What am I missing?

 

Im past that I think...I have e-wrecks driver listed and it's working I just have no CCC and have no way to install it!!

 

I will clean install and try again thx.

 

http://www.tweakforce.com/ download it here and install ccc only

 

OMG!!! I would like to thank everyone that has help with their comments...I was able to do it this time and both are installed and working...catalyst 09.3 and e-wrecked bored mod v3 drivers are set.....THANK YOU AGAIN!! I am going to bed will try them out later!!

 

Lol. be sure to post results later.

 

Can i use this also with my ati mobility hd4650? thx

 

install it and see so we can go from there.