The A4500 is max 115W board. The slot will push that, a different system I have has a P5200 in it and it kicks up to 180W total system draw with the MXM board (in GPU-Z) reporting over 100W of power draw from the MXM slot. The P5200 has no extra power connector cable or plug. So its possible they can get away without throttling, especially if ADLINK makes a few vbios for them to configure them out at 100W max draw.
https://www.guru.com.pl/product-pol-8039-EGX-MXM-A4500-Modul-MXM-NVIDIA-R-RTX-TM-Ampere.html
That's one that I found rather quickly!
-
-
Ah that's the one I am looking for, the 80W 8GB model. There's also a 16GB 115w model that will come out. It says 82x105mm so if that is true then the picture is just the RTX 5000 version as a substitute until the final version is made.
It will be very hard to get the 115w vBIOS since they didn't even respond to my RTX 3000 vBIOS request.
Even at 80w the A4500 will most likely be the fastest MXM card available (not counting the Clevo RTX 3080). I hope one of us here can get their hands on it. My 2nd RTX 3000 just arrived today so now I can patiently wait for A4500. I'm assuming it will be shipping in Feb or Mar. -
Adlink RTX 3000 in Alienware 18: http://forum.notebookreview.com/threads/ray-tracing-on-alienware-18-rtx-3000-mxm-upgrade.837495/
AW18 heatsink needs dremel to shave off bottom vram area so I used my spare M18xR2 100w gpu heatsink instead.@tomX, kothletino and Clamibot like this. -
mxm A4500 : will it be 80 or 115 W ...
https://www.guru.com.pl/product-pol-8039-EGX-MXM-A4500-Modul-MXM-NVIDIA-R-RTX-TM-Ampere.html
https://www.adlinktech.com/Products...d_MXM_Modules/EGX-MXM-A4500?lang=en#tab-36922
https://linuxgizmos.com/mxm-modules-showcase-nvidia-ampere/
@ssj92 M18x R2 heatsinks fit in A18 just like that ?Last edited: Jan 10, 2022Clamibot likes this.
The hopeful of keeping MXM 3.0b alive thread!
Discussion in 'Gaming (Software and Graphics Cards)' started by King of Interns, Aug 17, 2016.