The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Looking for PLL Clock Generate for HP NC6320 T7200 / Intel i945GM

    Discussion in 'HP Business Class Notebooks' started by prodism, Sep 8, 2011.

  1. prodism

    prodism Notebook Enthusiast

    Reputations:
    0
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    5
    Hi guys

    I have heard that people successfully overclocked a T7200 mobile from 2.0 GHZ to around 2.3GHZ.

    Unfortunately I could not find the PLL yet.
    I searched the internet for specs, spreadsheets, manuals if the PLL is mentioned somewhere - negative.

    I also looked at the motherboard itself and could not find the chip.
    I also checked with Sandra and Everest - negative.

    Further I used SetFSB for try and error without success.

    These are my specs:
    Intel Mobile Core 2 Duo T7200 @ 2.00 GHz
    Chipset : Intel i945GM
    Southbridge : Intel 82801GHM (ICH7-M/U)
    Bus Speed: 166 MHz
    Rated FSB: 667 MHz

    Thank you for any help.
     
    prodism, Sep 8, 2011
    #1
  2. User Retired 2

    User Retired 2 Notebook Nobel Laureate NBR Reviewer

    Reputations:
    4,127
    Messages:
    7,860
    Likes Received:
    10
    Trophy Points:
    0
    According to the NC6320 schematic it uses a ICS_ICS954215_TSSOP_56P PLL. Closest match that setfsb has is:

    ICS954213AGLF (ASUS A6VA, M9V/N, COMPAQ Presario B2800)
    ICS954227CGLF (Sony VAIO VGN-S460/S580P)
     
    User Retired 2, Sep 8, 2011
    #2
  3. prodism

    prodism Notebook Enthusiast

    Reputations:
    0
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    5
    Thank you. I checked both settings and my system crashed. I guess there is not much I can do!?
     
    prodism, Sep 9, 2011
    #3