[Drivers] HP dv6-4XXX / dv6-6XXX / dv7-5XXX / dv7-6XXX / ENVY 14-2XXX / ENVY 17-2XXX (INTEL)

I install AMD Catalyst 15.7 in Windows 8.1 Pro. It's excellent driver

 

It would be pretty cool if we had W10 support :\

 

I did a windows update from 8.1 to 10 all drivers from hp seem to work, but the only one that is giving me a hard time is the graphics driver. I am aware of Leshcat drivers but the problem with them is that the ATI card is always running so the system gets hot. Now what I've done is i installed the 14.4 Leshcat drivers in 8.1 I updated directly from the windows update and the driver seemed to have worked in 10 but i do advised that once 10 is installed disable hardware update from windows 10. I checked with SpeedFan and it seems that the ATI driver is not active which is good because previously when using 15.7 leshcat drivers the GPU was at a constant 52 degrees Celsius. Now onto another problem because of this when you restart the system it seems to take some time for the graphics driver to start at first it might seem like the system is not responding but after a while the screen turns on, and the system functions normally this issue is also present when waking from sleep the screen stays off but after about 2 minutes the system wakes up and functions properly. Windows 10 runs great on the Dv6t, but if only we would get a proper driver from HP which I doubt we will as we never got one for Windows 8.

 

I also installed Windows 10. The graphics drivers installed from Windows 10 are working fine. Don't know about the IDT drivers, did not install them, are they working fine on Windows 10?

 

The Audio drivers I previously installed are working fine thought the driver i had was in beta here https://mega.co.nz/#!74hV2AZT!NhEvSAU7MN4GhYZRSUkczpEY5BYr_xG98PgZcbMC9iM

 

Hi, I found this thread a few months ago while searching for Windows 8.1 drivers for my DV6 6121tx. Many thanks to the OP for organizing all the required drivers under one thread.

I recently installed Windows 10 as the free upgrade. Now, after upgrading everthing was running okay, no driver problem at all. I didn't even require to install many drivers after a fresh format because Windows 10 provides the necessary drivers via automatic windows updates. But I still wanted the Beats audio driver and interface and the HP 3D Driveguard because these cannot be provided by windows update.

So, after installation of Beats audio drivers from here, I found that the audio effects were not working. Then, I reverted back to the original Beats audio driver by HP for Windows 7 for my laptop and it worked fine.

So, I would like to know other people's experience on Windows 10 if they have installed the driver from here.

 

I just upgraded my dv7t-6000 CTO to Windows 10. I didn't install any drivers, just what Windows 10 upgraded them to. I am having a bit of an issue with waking from sleep and I suspect it is graphics related. When waking from sleep, the laptop lights illuminate; however, the screen is black and the only fix is to shut it down by holding power and powering back up.

Is there a way to get the AMD and Intel switchable graphics? My BIOS is F.1B which gives me no options in the BIOS.

 

Try using custom drivers like Leshcat and see if that happens. I can set to sleep, hibernate without any problem. I have the same BIOS too but I'm using a modified one. Anyway, that won't matter because I haven't changed any setting in the BIOS.

 

Paplu, which drivers are you using? If you don't mind me asking?

 

I'm using the leshcat 15.7 v1.2 driver now.

 

Yes use the leshcat drivers. With the 15.7 v1.2 the gpu is always on ulps set to 0 in regedit keeps the gpu always on. The only advantage I see to this is that windows starts up faster and also wakes up properly. If you set it to 1 its turns the gpu off but start up time is really slow and same goes for wake from sleep. What I've done instead of using the 15.7 v1.2 I'm using Catalyst 14.4 WHQL UnifL v2.4 when installing make sure you install the dynamic version of the driver with this driver everything works fine the gpu stays off avg temps of 45c and start up time is much faster, but also remember to turn of automatic windows driver updating.

 

What Notebook do you have?
I have a Hp 6150sl with 6770m & HD3000 and I am wasting a many days of my life trying to get a stable PC.
Can you do the manual switch between the two GPUs?
How did you install the 14.4 2.4? Did you have Fixed or Automatic setup i BIOS while installing?

 

If you want a stable PC, go for dynamic mode and the latest drivers. But if you want Fixed mode, you have to use Windows 7 with 14.4 v2.2 and UBR for brightness controls and also a registry fix for sleep/wake issue. I have set to fixed mode in BIOS. BTW I have dual boot Win 7 and 10. Win 7 fixed and Win 10 dynamic.

 

Hi my Friends... This it's my experience

Updating http://forum.notebookreview.com/thr...nvy-17-2xxx-intel.556469/page-85#post-9749109 for Windows 10 installation.

My computer it's dv6 6b04ss with: 1TB toshiba(i don't have SSD for replace my DVD unit for a caddy, and i don't found caddy? compatible), 1 module 8GB RAM(i think to buy other), a screen upgrade to 1980x1024 (my 1333x768 was broken...), AMD 6770M 1Gb, Intel HD 3000, etc.

A. I have Bios Mod(MDL), then i install Windows 7x64 SP1 Pro (clean in a new hard disk) without internet. Install licence and key. For validation, i install driver of Realtek(7.092) for Windows 7.

http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false.

I then validate in Microsoft web page. I don't install others drivers.

2. I install Windows 10 with Mediatool USB installer. I connect to Internet, but i don´t install updates previews while install

3. Finish, i search windows updates, and restart. Finally, my computer it's great Windows 10, but Windows 10 not found driver for:

A. HP Wireless Button Driver: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123643_1 or directly: http://h30639.www3.hp.com/pub/softpaq/sp63501-64000/sp63752.exe (i don't testing ftp://ftp.hp.com/pub/softpaq/sp64001-64500/sp64043.html because other it's for Windows 10 and dv6).

UPGRADE 23-09-2015: http://forum.notebookreview.com/threads/popular-hp-notebook-software.519991/page-32#post-10088315
--------------------
Finish, all OK but, i continue:

B. Intel chipset device software: i don't found new version for Windows 10. Windows 10 install for default.

C. Intel Management Engine Interface: i don't found version for windows 10 (Windows 10 install for default)

D. For my Broadcom wifi: (Broadcom 4313 802.11 b/g/n) with PCI\VEN_14E4&DEV_4727&SUBSYS_145C103C, windows 10 install 6.30.223.256. Great.

E. For Graphics Intel and AMD: Windows 10 install 9.17.10.4229 (intel), and AMD 15.200.1062.1004. It's better what AMD 15.7.1 (AMD Catalyst™ Display Driver version 15.20.1062.1002), but i don't have AMD gaming evolved (not it's necesary, but it's in: http://www.amd.com/en-us/markets/game/raptr). Hydravision not exist more. Finally, I install and update to AMD 15.7.1... NOTE: I used three monitors in Windows 8.1, but i don't remember if mode fixed or dynamic. Windows 10 in dynamic mode don't work for me with three. I don't have more testing for today: http://irisclasson.com/2012/06/16/r...s-x53-x53sk-sx028v-for-two-external-monitors/. UPDATE: I test Dynamic and Fixed mode and it's equal, always switcheable graphics. Impossible AMD 6770 in exclusive (with these drivers and today configuration). Because HD3000 it's always working, don't work three monitors, but it's posible detect in Display in Control Panel. It's possible work with two external monitors, but impossible with three today.

UPGRADE 23-09-2015: I change register with EnableULPS=0. View http://leshcatlabs.net/forums/viewtopic.php?f=16&t=11&start=180#p13536

I don't test http://leshcatlabs.net/forums/viewtopic.php?f=6&t=956

-----------------------

F. IDT High Definition and Beats: en tenforums, i found this package sp63555.exe. Not for dv6, but for Windows 10 64 and i review my
HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C3388&REV_1001\4&36BD4FF5&0&0001
It's include: working beautiful with beats NOTE: I ear audio in notebook and hdmi speakers simultaneusly in Windows 8.1, but Windows 10 i don't testing today http://www.addictivetips.com/window...gh-hdmi-speakers-simultaneously-in-windows-7/ UPDATE: I testing today and problems it's lag, echo sound. One better option it's possible what KMPLAYER


G. Realtek card reader: Windows 10 install 6.1.7600.74. I update to V.10.0.370.102: http://www.realtek.com.tw/downloads...=25&Level=4&Conn=3&DownTypeID=3&GetDown=false. I found two in my devices(i don't understand), but it's necesary update second in Control Panel manually.

H. Realtek PCIe Gigabit Ethernet Family Controller: Windows 10 install 9.1.401.2015. I
update driver to 10.003: http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

I. BIOS for dv6-6bxx: Original it's http://h30639.www3.hp.com/pub/softpaq/sp60501-61000/sp60655.exe F.1C. I use Bios Mod (MDL) F.1C. Other option it's donovan's bios downgrade with whitelist for wifi and bluetooth... (WIDI and others options)

J. HP UEFI Support Environment: I don't use. The last version in notebookreview it's http://forum.notebookreview.com/threads/popular-hp-notebook-software.519991/page-32#post-9999660

K. Cyberlink Youcam: http://forum.notebookreview.com/threads/popular-hp-notebook-software.519991/page-31#post-9876059. I don't search new version. http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_141615_1&swEnvOid=4057

UPGRADE 23-09-2015: Testing http://forum.notebookreview.com/threads/popular-hp-notebook-software.519991/page-32#post-10088299

-----------------------

L. For my biometric sensor, I don't remember Validity Finger version what Windows 10 install (NOTE: windows 10 install my sensor, but don't your led... ), but i think what this versión(BAD, view UPDATE) it's up: sp55109 and I install. I too install HP Simplepass 2011 ftp://compaq.com/pub/softpaq/sp63001-63500/sp63224.exe 6.0.100.276. NOTE: Windows Hello don't work for me in this moment. I don't know problem UPDATE: I testing sp58900 of hp, lenovo drivers for Windows 10 l67y43a0.exe. Finally, i delete drivers and install Windows 10 driver for default(4.5.235.0). Windows Hello working beatiful. , but HP Simplepass 2011 it's broken .

UPGRADE 23-09-2015: i found this information:

http://h30434.www3.hp.com/t5/Notebo...mple-Pass-on-Windows-10-Solution/td-p/5187179

------------
M. Software for Lightscribe DVD: http://forum.notebookreview.com/threads/popular-hp-notebook-software.519991/page-31#post-9775083

N. Windows 10 install HP Mobile Data Protection Sensor 4.2.2.1, but i update to 4.2.9.1 http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125640_1

O. Windows 10 install Synaptics 19.0.12.95. Wonderful

P. Excuse me my english

I wait your testing and updates...

NOTE: i need information on Windows 10 recovery partition, it's possible save on external hard drive and recovery in hard disk crash case?

 

I just installed "Leshcat’s Catalyst 15.11 Beta UnifL v1.0 (07.11.2015)" on my "HP Pavilion dv6-6185la" with Windows 10 Home and everything it's working fine!, the trouble with the original AMD driver "EnableULPS" that cause a slow system boot it's disabled by default, I like that.

Web Link: http://leshcatlabs.net/2015/11/07/leshcats-catalyst-15-11-beta-unifl/

Forum topic link: http://leshcatlabs.net/forums/viewtopic.php?f=6&t=1126

Driver download link: http://leshcatlabs.net/downloads_unfil/

 

hello,

my switchable graphics is not working only intel hd 3000 is ok the other is not.

for reference my laptop is HP Pavilion dv6-6c06tx.

I am now looking for solution on how to fix this as this is now my only issue.

Help?

ATM I am trying the drivers presented on page 1. If anyone has the same model and fixed similar issue. Tell me how you did it. I feel like crying...

 

Hello ppl

I´m having the "HP DV6 1240e" Caps Lock and Number Lock Flashing twice, i read in HP that i could make a bootable BIOS stick, but neither the BIOS is available, or the software to do it.....contact HP and they don´t provide me nothing, can anyone help me?

Thank you very much in advance

 

I don't testing but i found this driver for HD6770m, crimson 16.1 beta: http://support.amd.com/en-us/download/desktop/legacy?product=legacy3&os=Windows+10+-+64

But it's update to 16.1.1 and Microsoft & AMD have now driver 15.201.1151.1008 in Windows Update.

 

Realtek Card Reader http://www.realtek.com/downloads/do...=25&Level=4&Conn=3&DownTypeID=3&GetDown=false V10.0.370.125

Realtek PCIe Gigabit Ethernet Family Controller: Windows 10 http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false V10.007

AMD V16.2.1 Beta Legacy http://support.amd.com/en-us/download/desktop/legacy?product=legacy3&os=Windows+10+-+64

 

Windows 10 Update install today Synaptics update to 19.0.12.98, do you testing 19.0.19.1? http://www.synaptics.com/resources

 

Realtek PCIe Gigabit Ethernet Family Controller: Windows 10 http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false V10.008

 

Leshcat’s Catalyst 16.2.1 UnifL and LTS
(Intel & AMD video drivers updated to may-30-2016)

Web Link: http://leshcatlabs.net/2016/05/30/leshcats-catalyst-16-2-1-unifl-and-lts/

Forum topic link: http://leshcatlabs.net/forums/showthread.php?tid=1176

Driver download link: http://leshcatlabs.net/downloads_unfil/


Tested and working fine on my "HP Pavilion dv6-6185la" with Windows 10 Home.

All credit and thanks to leshcat

 

Add FunkyMike to that as well ; )

Has anyone with an Envy 17 2000 experienced 100% HDD usage? Can anything be done to remedy this?

Does anyone have a way of using IDT without the original buggy Windows 7 IDT drivers (which also cause 100% HDD usage in Windows 10) ?

 

Maybe it's this:

"How to Change System Protection Maximum Storage Size for Drive in Windows 10"
http://www.tenforums.com/tutorials/...x-storage-size-drive-change-windows-10-a.html

And I don't use the IDT audio card anymore, I use a portable USB DAC&AMP (Fiio Alpen 2-E17K) and now I love to listen my music in Hi-Res audio .

Fiio Alpen 2-E17K
http://www.fiio.net/en/products/38

 

This may be late for those who have moved on but those still struggling,
and to those that were looking to find working beats drivers for your dv7 / dv6 on Win10 , heres what I found working:
6.10.6495.0(20 Dec 2013)
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_127154_1

Before restarting,

Right click speaker icon in taskbar, Select Playback > Speakers (click) > Properties > Advanced > switch to 24 bit, 96000 Hz. And thats all.

Drivers installed fine, and all the speakers are alive now.

 

There's also an IDT audio 6.10.6498.0 driver from the sp65012.exe file that may also work for the DV6/DV7 and ENVY 17-2xxx series.

Also Intel Rapid Storage Technology v12.8.20.1002 driver (released 6/22/2015) from sp71552.exe (for Win7/8/10 x64 only) - driver date is 5/22/2015, newer than the v12.9.x series.

 

Hi, I found sp71717.exe, sp72373.exe IDT drivers, but not for me (dv6-6b04ss with FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C3388). Finally, i found SP71886.exe
Versión: 6.10.6492.0 Rev.A(17 jul 2015) Microsoft Windows 10 (64-bit)

I found what it's optimal configuration: http://forums.laptopvideo2go.com/to...-on-windows-10/?do=findComment&comment=149629


NOTE:

6.10.6498.0 it's windows 8.1 and January 17, 2014 ftp://ftp.hp.com/pub/softpaq/sp65001-65500/sp65012.html

I have anniversary update, and i uninstall drivers first, restore point, reinstall. All good now.

NOTE 2: I found this HP SimplePass, but not it's for me (because i have HP SimplePass 2011 with authentec hardware) http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_171945_1#tab-history My it's http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_117897_1#tab-history But i don't use Simplepass now

 

Driver 15.201.2901.1004 work on 6770M (win7/10 x64): https://catalog.update.microsoft.co...updateid=6ba97438-fb95-46e0-9f4c-bfcd819abfa2 (open with IE or EDGE)

Driver Intel HD Graphics 3000 Driver v 9.17.10.4459 (Only for Windows 10): https://catalog.update.microsoft.co...updateid=d011cb93-6861-426f-b773-540f84fbbfc0 (open with IE or EDGE)

 

It's possible what for others Hp models, but for me not. Support
pci\ven_1002&dev_6820&subsys_06d91028&rev_83
pci\ven_1002&dev_6820&subsys_06da1028&rev_83
pci\ven_1002&dev_6820&subsys_16d91028&rev_83
pci\ven_1002&dev_6820&subsys_16da1028&rev_83

My model 6770M it's PCI\VEN_1002&DEV_6740&SUBSYS_185E103C&REV_00

I have Driver 15.201.1151.1008: https://catalog.update.microsoft.co...updateid=288bebf4-391c-4e28-bcdf-9c8b89bbf914

 

tonormal
C7302617.inf - wiin 7 (PCI\VEN_1002&DEV_6740)
C0302619.inf - win 10 (PCI\VEN_1002&DEV_6740)
1. to install through Device Manager manually.
2. reboot
3. install ccc2_install.exe from folder b302293
4. reboot

 

Excuse me, thank you very much. I try. Question, what software extract .cab? Because 7zip 16.02 not good. thanks

NOTE1: ok, winrar working

NOTE2: i see you in http://leshcatlabs.net/ or guru3d, and i interesting in opencl drivers support? Do you know anything about? thank you very much.

Today: Restore point. Try graphics drivers.....

NOTE3: I compare .inf files. Interesting



I found very much 64 bits files in new driver .inf. I found 6770m (good). Question. Delete old driver and install this, or update? First intel or first 6770?

NOTE4: My procedure ( i don't uninstaller nothing)
0. I have dv6-6b04ss with Windows 10 Anniversary Update x 64bits and 9.17.10.4229 (intel), and AMD 15.200.1062.1004 (installed of Windows 10 not Anniversary update, Windows detect)
1. Create restore point (if I found problems, restore)
2. Download software http://forum.notebookreview.com/thr...vy-17-2xxx-intel.556469/page-93#post-10339256 of ExDef with Internet Explorer (don't work Edge for me, not chrome or Firefox)
3. Winrar .cabs
4. Force installer of intel driver (let me pick from a list of device driver on my computer) . Restore.

5. Force installer of AMD driver (let me ...). Restore.
6. ccc2_install.exe. Restore
Interesting AMD Start Now Technology

I don't know this link before...

7. Equal for you ExDef?
8. Testing
9. Regedit, EnableULPS to 0, and enableulps_na to 0
10. Very cool my computer
11. Hp sell me 6740 for 6770?

NOTE:
12. Switchable graphics monitor working good

 

6740 this device id (6770M)

 

New version: 10.010

in other order, Realtek card reader: I update to V10.0.370.125: http://www.realtek.com.tw/downloads...=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

i found in programs two Catalyst

but i don't think uninstall nothing now

HP Wireless update: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_168877_1

 

When I install Intel driver 9.17.10.4459 (2016), After Windows Update installs versión 9.17.10.4229 (2015) as better... Why?
Thanks

 

I don' understand because intel reinstall your driver. I don't have this problem. But, do you have anniversary update? do you continue procedure? Do you have HD3000 + AMD 6770? What it's your computer?

 

Yes, I have Anniversary Update (compilation 14393).
Yes, I have HD3000 + AMD 6770M. My computer is HP Pavilion dv7-6090es

Driver for AMD 6770M is installed OK

 

De España, uhmmmm? This is a 2nd Generation Intel Core i3/i5/i7 Mobile Processor (Spring 2011) 1Gb 6770

My intel it's id hardware PCI\VEN_8086&DEV_0116&SUBSYS_185E103C&REV_09. Do you review intel id? Do you reinstall driver newly? Remember: "Elegir de una lista de controladores en el equipo" y "usar disco"....

NOTE: In Programs and Features: i have Controlador de los gráficos HD Intel 9.17.10.4229, but, if you review my graphics it's 9.17.10.4259. It's a problem of update information for programs in installer (property DisplayVersion but i don't change: http://stackoverflow.com/questions/28195435/update-installed-msi-version-from-exe)

 

waldinrg
use https://support.microsoft.com/en-us/kb/3073930
use this to hide Intel driver updates , as far as i know this is the only offical way to prevent driver updates.
p.s. microsoft has changed the behavior of auto updates, it will forcibly install the last recommended signed driver now no matter the version number.

 

Thanks!!! That worked fine.
Rolling back a driver. Microsoft show me a question (test with options) why I roll back driver.

After that, Windows Update says Windows is updated with driver Intel 9.17.10.4459. No more regression to 9.17.10.4229.

No need to use tool to hide/unhide updates

Sorry for my bad English

 

ERROR.

 

all ok? my english it's very bad tooooooooooooooooooo

 

Yes! All Ok. Thanks
ERROR is because my own message was repeated 2 times

 

Hi everyone, some help would be very much appreciated I tried everything I could to get my switchable graphic drivers working properly but I can't... I also read all your recent posts, but I'm very confused... Would someone be kind and explain step by step what's the actual procedure?

Here is my configuration:

HP DV7-6161sf
Graphics : Intel HD3000 / AMD 6490M
Windows 10 Anniversary Update

By default, in device manager, the graphic drivers are :

AMD Radeon HD 7400M Series (15.201.1151.1008) (... which isn't mine...)
Intel HD Graphics 3000 (9.17.10.4229)

OK, so far, the display works... BUT not very properly... 80% of the time, when I use the computer, the fan is very audible and the computer is too warm, only for small computer tasks... very annoying.

A clear tutorial would be very appreciate by this time !!

Thank you very much!

 

Question: i t's your graphics card PCI/VEN_1002&DEV_6760&SUBSYS_355F103C?
it's anniversary update?

 

Thank you for your quick answer. Yes I'm on W10 Anniversary Update.

And here is what is noted in event panel for AMD graphic card : PCI\VEN_1002&DEV_6760&SUBSYS_1659103C&REV_00\4&2F8F60C0&0&0008

But I don't know what this means ??? ^^

 

For drivers, you can search in .inf files if you hardware it's include. For example, view first photo: http://forum.notebookreview.com/thr...vy-17-2xxx-intel.556469/page-93#post-10339293 for my graphics card 6770.

C7302617.inf - win 7 (PCI\VEN_1002&DEV_6740)
C0302619.inf - win 10 (PCI\VEN_1002&DEV_6740)

NOTE: Create restore point preview, it's possible to go before...

Good, for 6490m (your amd graphics card) you search in c0302619.inf and found PCI\VEN_1002&DEV_6760 name Vancouver (Great ). Now, you have what install, with NOTE4 steps in http://forum.notebookreview.com/thr...vy-17-2xxx-intel.556469/page-94#post-10339391.

In other order, the fan is very audible and the computer is too warm, only for small computer tasks... very annoying... It's maintenance time (change thermal, clean fan, etc.). View manual: http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf or this http://h10032.www1.hp.com/ctg/Manual/c03015537 or technical service maintenance. This it's good, but you not change display: http://forum.notebookreview.com/threads/guide-hp-pavilion-dv6-6xxx-screen-replacement.690125/. And these videos, in youtube: https://www.youtube.com/results?search_query=dv6+6090
(your model it's similar) https://www.youtube.com/results?search_query=hp+pavilion+dv7-6135dx

NOTE: it's very important maintenance, because graphics card usually fail for this

 

Thank you again for your time tonormal.

Well, for the maintenance, I did it several times so it's not the issue here! In fact, I made a lot of different experiences lately with the graphic drivers, and at a point, it worked well. It was last week, when I was on W10 (not anniversary) with old Leshcatlabs Catalyst from 2014... and then, everything worked fine... no more noise, but still not the right name in device manager. So I think the problem is really about the drivers and I cannot create the same with the last W10 update.

I tried today with the last leshcatlabs drivers (16.2.1) but it still don't work properly I think...

Excuse me, but I'm confused with your INF files.

1. Where do I find them?
2. How do you download the "Advanced Micro Devices, Inc. Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.3, Graphics Adapter WDDM2.0 software update released in May, 2016" through Internet Explorer? I cannot see any link, only "add to basket".
3. In your clean install of the graphic drivers, do we still need the leshcatlabs drivers?

 

when you have download graphics card drivers and winrar

Well, add to basket and go to: https://catalog.update.microsoft.com/v7/site/Home.aspx view basket, download. NOTE: Intel too download

I think what you should clean with DDU or similar for old graphics drivers. NOT, I don't use lesthcat very much time. Restore point in case.... NOTE: you use thermal paste good, or very good . Good luck. Excuse me my english M.

 

Finally, my problem is solved and I succeed to get stable switchable graphic drivers... I spent 2 days, installing and uninstalling several times Windows in order to figure out where the problem was and finally got it! So, here is a quick tutorial which explains how I did it, hopefully, this will help someone later...

-----

NOTE:

- My laptop is DV7-6161sf with switchable graphic cards (Intel HD 3000 / AMD 6490m)

- Operating system is Windows 10 Anniversay Update (1607)
- What was the problem and the symptoms?

1. The computer was often warm and the fan very audible (which is a pitty since I remember how SILENT this laptop was when I bought it in 2011 with Windows 7...). Note : with the software Speedfan, the average temperature for the hardware (CPU/GC) is about 50-60 °C.

2. When Windows starts or wakes up after sleep mode, the screen remains black a long time before you can do anything.
For this second issue, there is one solution which I found in this thread : in regedit, set Enable_ULPS to 0.
BUT I don't advise you this method, since I found a better one

-----

PROCEDURE:

1. First, I solved this problem with a clean install of Windows 10. Maybe will it be possible to achieve this otherwise, but I will detailed what works for me, after a FULL REINSTALLATION of Windows 10.

2. IMPORTANT : disable your connection to internet during the installation, it will prevent the installation of pilots which are the source of the problem.

3. The only working drivers I found for my configuration were :

- Intel : https://catalog.update.microsoft.co...updateid=d011cb93-6861-426f-b773-540f84fbbfc0

- AMD : https://catalog.update.microsoft.co...updateid=6ba97438-fb95-46e0-9f4c-bfcd819abfa2

NOTE : I had many problems with this website... You have to "add to basket" the two drivers, but I didn't manage to open the basket after all! Apparently, the only solution is to use an old Internet Explorer version in order to navigate the website (I even install an old Windows 7 product to get the link! ... but I'm pretty sure you could find a easiest way...). When you have the 2 files, you have to extract the *.cab with Winrar.

4. After Windows installation, you'll get some generic graphic cards in device manager which we will replace with the downloaded drivers. Follow the procedure :

- a. install Intel first (In the Device manager, manually choose a local file and pick igdlh64.inf)
- b. reboot
- c. install AMD then (In the Device manager, manually choose a local file and pick C0302619.inf)
- d. reboot
- e. install ccc2_install.exe in the folder b302293 (the Catalyst Control Center by AMD)

Now, hopefully, you'll get your graphic cards working, respectively : Intel(R) HD Graphics 3000 (9.17.10.4459) and AMD Radeon HD7400M Series (15.201.2901.1004), with recent pilots from 05/2016. You can note, that the computer should be silent, and no boot screen problem at all (then, no needs for Enable_ULPS trick).

5. But now, the tricky part begins... If you connect your network card and look for Updates via Windows Update, it will force the installation of new graphic drivers, which (... try to understand why...) are older! (from 2015). And those drivers are really ****... they caused all of the troubles I explained before! And if unfortunately, the AMD driver is installed, then I didn't figure out a way to remove it properly and the problems start again even if you switch after for the 2016 drivers...
So, the only way for me, was to hide the update of AMD Radeon HD7400M Series via this windows tool : wushowhide ( https://support.microsoft.com/en-us/kb/3073930)


6. Then you can do all your updates via Windows update. It will probably download all the missing drivers at the same time.

7. Unfortunately (almost done, don't worry...), during that process and no matter what you hide in wushowhide, it will change again the drivers of your Intel HD Graphics 3000 with the 2015 driver (9.17.10.4229). But as long as the AMD driver remains the one from 2016, you just have to switch for the previous pilot manually via the device manager and it will work fine again.

Well that's all... It took me A LOT of time to figure it out, but now for the first time for a long time (actually, since I left Windows 7), I have again a stable and silence laptop which works great on Windows 10! And now, the average temperature is between 40-50 °C.

And of course, thank you very much to tonormal, who considerately helped me in my research

 

And thanks to @ExDeF, he found these drivers. Very good @libraemy

NOTE: I cann't reinstall now, and i need change thermal paste too