just finished modifying the heat sink
-
Attached Files:
-
-
Spartan@HIDevolution Company Representative
Make sure you set your boot mode to AHCI or RAID whatever you had beforeAhsan Rameez likes this. -
i put now raid before i not remember
-
-
I discovered laptop and new 980M work fine (GPU only goes up to 270MHz) till I plug in the charger, but after that, anything 3D will cause my laptop to freeze. I'll try to find a better charger, but if that doesn't help, I guess it could be the GPU or Motherboard :/
I can't find any similar problems in this thread, anybody heared something simillar? -
Looks like your 980m is not fed with enough voltage when it kicks to 3D mode... That's strange behaviour. Makes me remember I had same issue 10 years ago (or so) with a 9700m gt MXM on a FSC Pi1556... Car would work nicely on 2d mode but as soon as 3d mode was enabled, it froze the whole laptop. Fortunately at the time, it was easier to fix. You should try to save your vbios with GPUZ and try to see the voltage given to the card in 3d mode with maxwell bios tweaker.
It can only be helpful to solve your issue.
Edit: just a silly question... Did you remove all trace of your existing nvidia driver BEFORE installing the new card?? If not, that could be the source of your problem. REMOVE ALL NVIDIA DRIVER then use drive fusion to wipe anything "nvidia related" and after that install a new driver, with custom ini file if needed (go to laptopvideo2go). -
I did a clean install, reset EC and BIOS.
The part about voltage, I had 880M MSI working in my laptop, so I'd think the 980M BIOS would benefit raising the voltage, at this stage I'm 99% sure it's the card not laptop.
The 980M is CLEVO.
I'll ask the seller if he's OK with me tinckering with the BIOS -
Any update?
-
I tested another 880M in my laptop and it worked, so I guess it's the card, can't be 100% sure thou.
I didn't try other BIOSes on my card because the seller didn't answer my question if he'd permit that.
I also tried 240W PSU and replacing my 4930MX with 4700MQ, always same result.
Returning the card this week
-
Looks like your 980m is defective...
-
Kevin@GenTechPC Company Representative
-
hi everyone
i just updated my card gtx 980m but i cant use gtx 980m in gaming everything install ok but when i open game its use intel gpuAttached Files:
-
-
Kevin@GenTechPC Company Representative
1. Was the system plugged in?
2. How did you determine that the game was using IGD instead of PEG?Ahsan Rameez likes this. -
because its show always intel 4000
-
every time when i run game its show intel hd 4000
Attached Files:
-
-
i try everything clean install windows also change everything in nvidia control panel but cant run game with 980m
-
card detected well no problem driver install without modifying
Attached Files:
-
-
yes system plugged
-
Kevin@GenTechPC Company Representative
That's normal because your system uses Optimus technology. Is your game playable? You can also turn on fps on your game to verify.
-
i cant run 3d score or games is not playable its always run on intel gráfices
-
right now i am installing windows 7 lets if its work
-
gpu activity always show 0
-
Kevin@GenTechPC Company Representative
You can enable an additional icon in the notification area to see which graphics card is being used:
- Click Start and then Control Panel. Select Classic View from the left side of the window.
- Double-click NVIDIA Control Panel.
- Click View and next Display GPU Activity Icon in Notification Area.
- Click the new icon in the notification area. A pop-up will show applications using the NVIDIA graphics. When the NVIDIA graphics is not used, it will show None.
-
yes bro i already did its show not in use always using hd4000 intel . 980m showing everything good instalacion is good without modifying inf but in games or start any applications its not use nvidia gpu even i also check stress test but its not starting gtx 980m only runs intel
-
Kevin@GenTechPC Company Representative
What about BIOS & EC firmware? Are they up-to-date? When did it stop working?Ahsan Rameez likes this. -
i have this and install the card today everything seems good in installation but when i start gaming its not run games with 980m its run with hd4000 .is gtx 980m msi versión
Attached Files:
-
-
Hi. Just out of curiosity, have you set high performance nvidia processor as the prefered card in global settings in Nvidia Control Panel ?
Skickat från min iPhone med TapatalkAhsan Rameez likes this. -
yes i set this also but no understand why its not enable my card any activity
-
Download Furmark (stresstesting software) and run it and see if it recognize your card, and if it does and you run it, you will see how many fps the card is generating + you will also see the temperature.
Skickat från min iPhone med TapatalkAhsan Rameez likes this. -
already try’s but its run on integrated grafics instead ok nvidia
-
What i the modellnr of your msilaptop ?
Skickat från min iPhone med Tapatalk -
gt60 onc
ivy bridg -
So, If I get this right your card is visible in device manager and you have no problem updating nvidiadrivers(install recognize card) Is bios and firmware original from when the laptop was new, or have you updated them. I cant find the versions you have (your screenshot) on MSI:s supportpages for the MSI GT60 ONC.
Skickat från min iPhone med TapatalkAhsan Rameez likes this. -
i
just updated my window to 10 just a wait i show you results bro -
Kevin@GenTechPC Company Representative
-
Yes it is possible. just go to first page of this thread and you'll know how to upgrade to 980m for your laptopAhsan Rameez likes this.
-
yes its work awesome help thanks everyone
here is my specs
gt60 onc
i7 3610qm
16gb ddr3l
bios 51x ec t18
gtx 980m 8gb just need to modifications inf
i got call of duty ww2 60fps in ultra
i saguesst nt-h1 thermal past after 2 hour gaming temp never go upto 83c -
yes its work awesome help thanks everyone
here is my specs
gt60 onc
i7 3610qm
16gb ddr3l
bios 51x ec t18
gtx 980m 8gb just need to modifications inf
i got call of duty ww2 60fps in ultra
i saguesst nt-h1 thermal past after 2 hour gaming temp never go upto 83cTxordi likes this. -
Kevin@GenTechPC Company Representative
-
its was inf file i modify but i cant make good so bmtwo modify for me and its workKevin@GenTechPC likes this.
-
Great
..so congrats to that you got it sorted out
Skickat från min iPhone med TapatalkAhsan Rameez likes this. -
work awosome yes and really its very helpful thread i cant do this without this thread very helpfulKDs likes this.
-
is this possible to upgrade cpu 4th gen this laptop msi gt60 onc
-
Kevin@GenTechPC Company Representative
-
just need to modify inf file
-
What model? What card? Could you run 3dmark firestrike?Ahsan Rameez likes this.
-
stillin very busy .
gt 60 onc
i7 3610qm
16gb ram
gtx 980m 8gb msi versionsicily428 likes this. -
-
this is 3dmark score but just trail version
Attached Files:
sicily428 likes this. -
-
Hi guys
Just wanna know if there is someone who has improved their cooling and how you have done it. I have also b.t.w upgraded my GT70 2 PC Dominator to GTX 980 from GTX 870. Already with the 870 I had problem with sound disappearing while gaming (gpu gets warm and the sound chip gets affected, a very common problem as I understand it) The problem has continued with the 980, so I was just curios what you have done about it ? (besides running the fan at full speed all the time while gaming) Otherwise I love this laptop and all possibilities to upgrade it, and last but not least I want to thank you all helpful people in this thread
Ahsan Rameez likes this.
The Official MSI GT60/70 970m/980m Upgrade Thread
Discussion in 'MSI' started by Talon, Nov 10, 2014.






