I believe standard -50mV, wheb throttlestop starts -100mV. So the test yesterday was with -50mV.
-
-
To all suffering from the relatively high package power draw
http://forum.notebookreview.com/thr...15-vapor-15-pro.830272/page-147#post-10983000 -
A couple days ago i did Windows 10 fresh install. I also installed all drivers from Eluktronics(they are a bit old) except Intel ME driver. Problem is - after some time in a sleep state the laptop wakes up by itself. Event Viewer says :
The system has returned from a low power state.
Sleep Time: 2020-01-16T19:50:46.345551900Z
Wake Time: 2020-01-16T21:51:50.012583700Z
Wake Source: Unknown
My laptop Mech 17 G1r:
windows 10 ltsc
core i7-9750h
nvidia rtx 2060
undervolt offset -110mV
Bios N.1.52
I suspect that this problem is hibernation problem but I'm not sure. So should i install missing intel ME driver(in device manager there are no yellow triangles) or update bios(there is a new bios N.1.53 for schenker xmg neo 17) or turn the hibernation off? -
-
-
-
Id think the screen might be tricky unless there is a vendor doing that so you could get the part numbers, and the. Make sure you had the right cable. -
-
http://forum.notebookreview.com/thr...-15-vapor-15-pro.830272/page-13#post-10952921 -
-
If you could print a good replacement base cover, that seems like it would be perfect.
-
-
btw, does anyone have a way to set the key color white? Choosing white in the control center app doesn't set it to white, more of a blue color.
-
-
-
-
-
Has anyone been experiencing sudden complete shut downs on this laptop
? It happened to me when I was playing games like GTA IV or Skyrim (at max settings)....
It's a wonderful tutorial which is not hard to do, but you HAVE to be very careful!
Prerana likes this. -
-
Does anyone play overwatch on the 2060 version? I'm having a strange thing happening. When I first tried it the other day, I was getting 250-300fps. Yesterday I was around 100, even dipping under. My control panel is set to use the 2060. I tested Firestrike and got my highest score ever. And ideas of what to look for.
-
I actually set OpenHardwareMonitor to log temperatures to a file so I could see if CPU/GPU would be overheating at the time the PC shut down. Reading those logs, it looks like the GPU was at 83 degress (Celsius). This post mentions this is the temperature where the GPU starts to throttle (thought it seems to be talking about the PC variant of the GTX 1060): https://forums.tomshardware.com/threads/gtx-1060-safe-temp.3030308/
-
Prerana likes this. -
https://www.laptop-battery-shop.com...-1155v-7900mah-original-batteries-p-7277.html
-
On OW, with 3.9 GHz CPU and 1540 GHz GPU, I play on all medium and get 144 fps capped consistently; minimums down to 110 fps on really taxing team fights. -
What drivers are you on? Any boosts enabled or undervolts set?Last edited by a moderator: Jan 23, 2020 -
-
Just noticed, having a sub-woofer is now an option instead of standard out of the factory based on photo and versions sold.
https://www.notebookcheck.net/fileadmin/_processed_/a/f/csm_MG_7431_134754b24c.jpg
https://www.notebookcheck.net/fileadmin/_processed_/2/1/csm_neo17_24_7bc0ce7a89.jpggenexis_x likes this. -
-
I am trying to put another m.2 sata ssd in my nvme slot(one closer to the fan) but its not detecting, Can somebody confirm if that slot only takes NVME drives or there is some problem with my machine cos its working fine when I put it in the sata slot
-
undervolter0x0309 Notebook Evangelist
I'm trying to speed the animations that react to your typing such as ripple, spark or reactive. Unfortunately the gaming center slider isn't enough. When I type at at semi-fast speed, the keyboard animations are laggy.
-
In terms of animation speed, types, and colors, those I think depend on the version of the CC, the performance of the lighting under-load might have changed between CCs. The CC I'm using doesn't get lag under any typing or performance load.Last edited: Jan 24, 2020 -
undervolter0x0309 Notebook Evangelist
Thank You -
-
undervolter0x0309 Notebook Evangelist
-
Is there a detailed instruction how to install Sound Blaster Connect on windows 10 LTSC?
-
https://www.laptop-battery-shop.com...-1155v-7900mah-original-batteries-p-7277.html -
Has anyone tried putting the keyboard from the 15" in this? If so, how was it? Were the keys sitting too low?
-
is it just me or is the area above the keyboard F5-F11 keys extremely hot? i dont recall any power delivery circuits underneath that area. why is it so hot? will it cause long term problems?
-
undervolter0x0309 Notebook Evangelist
-
Anyone happen to try swapping the screen for a 4k 60hz on the evoo 17 or similar chassis?
-
walmart EVOO 17 (EG-LP6) does not have subwoofer. where to get it & how will we wire it ? any prewired port to plug in?
-
undervolter0x0309 likes this.
-
The sound is so bad that you beter invest the money in a decent headset than putting a sub inside.
On the other hand, I don't suffer from crackling noises at all.
I have another problem, I never updated my control center but recently it changed behavior.
The fan speed seems to not spool up anymore, only when i boost it manually. Temps are still OK but much higher than before under standard settings. CPU went from 70 degrees and moderate fan speed to 80 degrees and low fanspeed. -
Possible to use other CCs with any barebones? The Eluktronics one looks to have more options than the Illegear one. Would love to give the XMG one a shot as well
-
-
Today I have another 'problem', my Tongfang seems to be warped, but only when the lid of the screen is open. If you start to type, it is not flat on the table. (And the table is
).
If tou close the lid, the laptop feels straight and doesn't move at all. Very strange.
I almost never use the laptop as a laptop, so I didn't noticed at all. Maybe my x-stand caused this... Are heat? But I never suffer from very heat components (mine never went above 85 degrees),
-
-
.
undervolter0x0309 likes this. -
So I've got a problem with my PCSpecialist GK7CP0S.
It developed a screen flicker just after Christmas so I sent it back for repair. They found a fault with the motherboard and replaced it, did their burn in tests and sent it back.
When I got it back all seemed well until I tried to launch a game. If the laptop is plugged into the charger the system hangs, the screen artifices and then crashes. If I launch the game on battery it'll run fine although at a reduced speed.
I tried everything I could think of. Fresh install of Windows. Removed the Nvidia drivers via DDU and loaded the ones from their website and nothingwould fix the problem.
I sent it back as a failed RMA as games launched fine before returning it for repair (I was using an external display for a few days while waiting for collection)
They told me it must have been a corrupted driver and that they'd wiped it and reinstalled the correct drivers and all was fine. When I got the system back it was still doing the exact same thing.
The strange thing is Furmark and Passmark are both fine with the graphics tests but Superposition fails as soon as you launch the test. Any game crashes the system be it on Steam, Origin or stand alone.
PCS are claiming it is a software issue and are refusing to do anything so at this point I haven't got a clue what to do.
Anyone have any idea what might be causing this? -
undervolter0x0309 Notebook Evangelist
- Reset undervolting
- Check temps when gaming
- Check power adapter voltage when gaming
- Install intel and nvidia drivers
TONGFANG GK7CN6S / GK7CP0S / GK7CP7S
Discussion in 'Other Manufacturers' started by sicily428, Oct 17, 2018.