Official Coffee Lake Refresh Thread/BIOS for ALL Clevo Laptops - RTX CARDS NOW SUPPORTED

MXM used to have standard sizes, not so much any more.

 

So for who is this bios thread then? when appearently RTX cards won't fit in my laptop.

 

These modified bios are valid for many users of laptops on the Clevo platform and the fact that you do not quite understand why they are talking about only one thing, you should not even start making modifications yourself, it is better to find specialists in this field and entrust them with these procedures. on the p771dm model with these modified bios, you can get support for 9 gene processors, the installation of better matrices, support for rtx series cards, you can install mxm cards from MSI on your model after a slight modification of the case.

 

Which RTX cards are supported 2000 and 3000 series? But only when made with a slight modification to the case?

 

that'd be great. I'd assume @Papusan and @jc_denton would be down for a set of fans too?

 

You can do without modifying the case, consider options for NVIDIA Quadro RTX mxm 3.0 cards.NVIDIA Quadro RTX 3000/4000/5000/6000

 

Whats this all for? Fans and heatsink for 30xx? Color me interested

 

I might pick up a set of 3 depending on price. Also, a main thread in the owner lounges might result in a bigger batch buy.

Higher blade version of stock ADDA fans
http://forum.notebookreview.com/thr...s-now-supported.825558/page-242#post-11103190

 

I'd be interested in a heatsink too even if I don't grab a card just yet.

 

For the systems that can fit those that never supported them for one.

 

Interested in a heatsink and fans Pending the price of course lol

Especially if they should work on 30xx, then I can make it a long term investment type of thing.

 

These radiators are universal, they can be used for 10-20-30 series video cards.

 

Force of habit, I tend to ask since my MSi 1080 is what I got which is further from standard...

 

Recently
received a new arrival of laptops,VGA cards rtx30 and power supplies for 660 watts))).

 

Very shiny.

 

Curious how well these perform, and whether there's a link for them.

 

New heatsinks for Clevo p775 and p750 are ready, suitable for 10-20-30 generation cards.

 

Wow, whats the price for the p775 ??

 

240$

 

Thanks, the price is not bad. The problem is to find a 3070 or 3080 mxm . Do you have a price for them?

 

I'm intrigued, if they could help to keep my GTX1080 cooler under sustained load (MSFS takes it to 91 C). Are these liquid metal compatible? Where would one order, if interested?

 

I found a Clevo 3080 MXM for sale, but the price is 1700 Euro!!!

Jesus Christ, thats almost the price of good laptop... DTR are really a dying breed..

 

Which heatsink do you currently have?

 

https://www.aliexpress.com/item/4000584804041.html?spm=a2g0s.9042311.0.0.5c474c4dMfofHv

and the upgraded fans

It's really not bad, but the 1080 under full load seems like a tough beast to tame in the 750 chassis

 

Think you need LM on that 1080, only way to tame it

 

It's certainly going to help, so long as your contact with the core is very good.

 

Unfortunately, yes, the prices for the 30 series Clevo cards upset me too, the price is greatly overpriced

 

New mxm cards were always expensive, that's never really changed.

 

I agree that mxm cards have always been expensive, but 30 series cards are at least one and a half times more expensive than 20 series cards at the start of sales.RTX 2080 Clevo at the start of the sales could be purchased for $ 1200, now it can be purchased for $ 1000, and rtx3080 Clevo lowest price I've seen $ 1720 and that's excluding delivery and customs duties.

 

These radiators significantly improve cooling, for even greater performance of the cooling system, you can install custom fans. Regarding the order of these goods, we are working on this issue, most likely we will be able to arrange for residents of Europe and the United States to purchase on the Ebay site with delivery from Russia.

 

That's the same setup I have. You shouldn't get near thermal throttling unless you have a core contact issue. I suggest replacing the stock thermal pads with K5 Pro as the tolerances between the different height components on the board are simply too tight for thermal pads IME. Once you fix the contact with K5, that also allows you to use LM.

 

Interesting. This doesn't make the board messy or make the heatsink difficult to remove later (e.g. to remove dust)? Any advice for how to apply it? I assume it gets dabbed on the top of the VRMs, etc. and then the heat sink is pushed down; wondering how to know whether the 'dab' is appropriately sized.

 

I have K5 Pro aswell only on the CPU Heatsink, its kinda messy yes, but it non conductive so no worry. You kinda need to put a lot on every Vram, it gets really squezed with the Heatsink for a perfect contact, the excess is just getting pushed aside. I find it very good but messy . but i dont mind.

 

Previous MXM cards werent produced during the strain of a parts shortage.

 

They are basically selling every card produced in a machine.

 

It is messy, but the gains are worth it. If in doubt, apply more than necessary. Too much is better than too little.

 

Hello,
I have a P775 DM3 G that i've used with a dsanke Bios for close to a year. I'm going to sell it soon, there is no risk in reflashing it with an official bios ?

 

Make sure to have a programmer at hand.

 

Give me the solution to buy one of those. Want to mod my P870DM Heatsink for future RTX 30 upgrades.

 

Do fans like these exist for the original DM (the 5 volt ones?)

 

Hey guys I was following the instructions to see if my VBIOS would need to be flashed, but I'm not completely sure why I get this or where to check for my current version.



I have a P870KM1, and I would like to upgrade to either A 9700K or 9900k

My current BIOS is 1.05.08


EDIT: thank you whoever can help me in advance

 

Run the Check GOP batch file from the archive as administrator and see the UEFI version

 

Hey man, thank you for the response. I have been running it as an admin. But that is what I keep getting.

 

Just to follow up on this, I made a fairly liberal application across the VRMs around the CPU/GPU and the GPU RAM, etc. and it seems to have pulled the peak temperature down to 84 C on the 1080. CPU was largely unaffected, but it was easier there to tune the thermal pads originally because the periphery requiring heatsink contact was much closer and a credit card could be used to project from the top of the CPU outwards, so I think that was pretty close to ideal, but it seemed better to go all-in on the goo. The GPU, though, as you mention, is just insanity with varying heatsink and component levels.

Thanks so much for making me aware of this option; I hadn't known about it at all.

 

Usually I hand tweak the pad thickness and use impression tests from thermal paste (after an eyeball test with it sitting flat outside the chassis) to check all is good.

 

Any news on that? Did it work with the current BIOS version on a P870TM?

 

The processor is still on its way to me, as I get it I will definitely write about the results.

 

@dsanke
Any chance of RTX 3080 support? P870KM1-G, i9-9900KF,

My 2nd GTX 1080 failed a few days ago.

Curious if you want to (or are able to) support RTX 3080.

---
有機會支持RTX 3080嗎？ P870KM1-G、i9-9900KF、

幾天前我的第二個 GTX 1080 失敗了。

好奇您是否想要（或能夠）支持 RTX 3080。

Thank you sir.



Sent from my SM-G998U1 using Tapatalk

 

If you have a vapor chamber on that KM you will have no chance of fitting a RTX 3080 (fitting mounts in different position)

 

@dsanke
Any chance of Pascal / RTX support on the original P870DM dsanke bios?

Thank you.