Clevo Overclocker's Lounge

Hi gents,

Any tips on memory overclocking in regards to secondary voltage (pll + uncore and the like) tweaks on a prema powah P87 dm1.

Been playing with 2x 8gb gskill 3200mhz sodmims (samsung B-die) which i can happily get to run at 2966mhz with timings of 16-17-17-38 (421 rfc) on 1.2v. For the life of me i cannot seem to acheive a meaningfull improvement even when running stupid memory input voltage of up to 1.5v. And thats with lots of slot swapping, training time and a tons of CMOS resets.

Best i could acheive was 3004mhz 15-17-17-38 on a single dimm @ 1.4 - which makes me feel im doing something fundementally wrong or its just the silicone lottery.

The most annoying thing being that the sub $100 second hand 2133mhz rated samsung OE ram i run in the P75 happily does 2800mhz 15-15-15-36(374) @ 1.2 and when doing the old latgency test of freq / cl it comes out on top!

It has fun playing with thaiphoon burner and have learnt alot so thats the +ve thing

 

Here's this...

http://hwbot.org/submission/3769968_

 

Rerun this in windows 10 please.

Damn, this gpu is still holding up. June 8th 2012.

 

I got rid of Windows 10, so I can't run it. No longer dual-booting. Only using Windows 7 at this time.

 

Ah, so I see.

 

Next project....3600 Mhz

 

Getting ever closer to that rated speed though your latencies are going to be about the same as the stock speed and timings so only 5% bandwidth off. That's probably hard to even benchmark the difference.

 

That's not really why I'm doing it. It's more of a being first to get the ram as close to the rated speed as possible. Along with getting it to somewhat function.

Side note:
The bandwidth is already higher than 100 percent of any other laptop at the moment.

 

He's also using CL 17-18-18 while default at 3600Mhz would be CL18-19-19...

 

looks like 64gb set has better chance to do above 3000..

 

Yep. Already proved that with 64GB 3200 Mhz Ripjaws.

 

finally got bluetooth working.. after 1 month since getting the laptop. horray! now i can focus on mod and ram oc.

 

Exactly so latencies about the same, just a bandwidth deficit of around 5%.

 

i donno man in overclocking term that extra bandwidth and lower CL is pretty impressive tbh. when it comes to few points in OC everything matters

 

I'm not criticising the speed, I'm saying he is getting the stock overall nanosecond latencies of the kits rating it's just the throughput that's slightly down.

Latency = speed/timings which is roughly the same for his settings and the kits rated.

So it is just the peak bandwidth that's down just a tiny bit which will be hard to even measure with benchmarks.

 

Then what is your take on this one?
http://forum.notebookreview.com/threads/clevo-overclockers-lounge.788975/page-1517#post-10672480

 

Considering that CL16 is the default speed for our 3200Mhz RAM I think running 3600Mhz at CL17 is pretty darn good.

 

It's interesting the range of timings you have explored for each speed.

 

It's a long lengthy process to say the least...

 

Kinda shows you the pains that the memory re-binners go through.

 

Indeeded.

 

Oh no, just had the first Win on Fortnite and apparently it doesn't count due to being in the new Sniper Shootout mode!?. As if my statistics ain't bad enough...feels like I will never see that round umbrella...

@D2 Ultima why did you suggest this game to me?

 

Lol Prema, just motivation to keep going in the normal mode

 

Get in on Pubg man.

 

i recommand play Thief gold. 1998/1999 game.

 

Psh, original Deus Ex FTW.

 

you crazy bro, Deus Ex is decent but it simply cant be compared to a master game like thief gold and thief 2.

 

Nah you crazy, Deus Ex is the GOAT game and immersive sim that bridges Thief, System Shock 2, and BioShock.

 

no way man. Deus Ex isnt remotely immersive like thief 1/2. you and meaker crazy x2

 

I've always said, all the best people are crazy.

 

i just went back and saw your message again and you have bioshock in there.. if you're only playing for the sake of good story i can understand why you included bioshock but honestly, the game play of bioshock is just trashy vs DX, thief and SS2. bioshock is too similar to modern game, more linear etc, bioshock infinite is even worse.. not like the small open worlds of thief.

 

This thread has now officially been hijacked with gaming discussions!



Gaming Sub-Forum

 

Life is a game buddy!

Spoiler

 

The only thing good about the original Deus Ex was Hong Kong Streets.

EVERYONE here knows that Star Control 2 was the best PC game EVER MADE.

 

Greetings everyone! First of all, i want to say sorry for my bad english, because i didn't get practise at all. Recently i got laptop Clevo P775-TM1 G and i want to ask u guys:
1) Сan i overlock memory throught XTU or i should not do it?
2) Can i have a chance to get prema bios (cause my bios is in stock) if i bought it not from prema partner (in fact i bought it in Russia from a guy, who sells laptops not as entrepreneur, but as private person)?

 

LOL I didn't even get this alert, I said it was free and battle royale xD

 

New version released today Futuremark 3DMark + TimeSpy v2.4.4254 (February 5, 2018). The latest version forces hardware monitoring information to be sent to Futuremark for validation of scores (and not just a general hardware and drivers probe).

Spoiler: ChangeLog

v2.4.4254 (February 5th, 2018)
Improved

• The installer is now available in Japanese, Korean, and Spanish.
• To meet our improved score validation checks, hardware monitoring information is now required for competitive submissions to the 3DMark Hall of Fame.

Fixed

• Restored the 3DMark splash screen when starting the application.
• Fixed a crash that could occur when the system returns unexpected values for the amount of video RAM.

 

To be fair for me it was always more of a personal test to see what I could get.

 

Does anybody the exact settings for an oc for the P870TM1-G. Id like to get 8700k at 5.0ghz and my memory at 3000mhz. I have the corsair memory variant rated at the 3000mhz but is being read at 2666mhz even when i use xmp profile.

If not then an undervolt with 4.7 all cores would ve just fine. A point in the right direction is fine is well. Please and thank you everybody. Btw its for the bios not xtu.

 

I would like to thank @Mr.Fox and @Johnksss for the motivation...

Best Firestrike achieved... 21813... What's a P870TM?


I'm now open for @Prema -mod Team invites

Can only imagine if I had more RAM and some Premamod goodness...

 

Saw the other post first and had already replied there:

@Mr. Fox or @Johnksss can send you an invite for the Team

 

Very nice scores

 

I am taking some time off for travels, until then:

Spoiler

 

Happy travels, have fun

 

Man...though life for you and for honest modders who tried to get the most out of their Clevo's, maybe it's too late now to show some support and maybe you are already over it, but hope everything is better and to see you back on track helping people, good luck with the Prema project, I'll keep an eye on you if you don't mind. I'm just getting into modding so that's why my reply is this late

 

Oh wow. Awesome Glad to be part of the team.

Thank you very much

Safe travels

 

so after almost 1 yr of having the shunt mod i wanted to give a little feedback and undid the mod just for the sake of it + wanted to look what happened so far, removing the liquid metal was quite easy and was still relatively liquid and looked good even after transportation cold/hot different humidity etc. but yeah it seems the gallium in the LM eats away the solder, the RS3 shunt actually came off after i slipped a bit and without much of a force, don't worry the card still works after i resoldered the shunt. What i immediatly noticed was that my 1911-1923mhz clocks dropped to about 1730-1780mhz and they moved up and down like mad according to MSI AB, i expected that yeah but damn after all this time with that mod i never thought it would be that bad but seemingly i was wrong so i think i either stay that way and hope Volta MXM get's here or i just do it the right way and buy a programmer to flash the vbios chip like some of you did, with quite good results, cause so far the book still runs like a kitten after some magic sparkles.

 

New version released today Futuremark 3DMark + TimeSpy 2.4.4264 (February 12, 2018). Nice... Today's standard. New version out once a week

Spoiler: ChangeLog

Improved

• Improved score validation checks. Result submits from previous versions will no longer be eligible for the 3DMark Hall of Fame.