Ah missed that post :
- 1°) Monitor temperature. - ThrottleStop / HWinfo / HWMonitor
- 2°) Confirm the OC parameters i set to be effective ( resource monitors read [email protected] Ghz ). - ThrottleStop / HWinfo / HWMonitor
- 3°) Do a little stress test to check stability on load. - TS Bench / wPrime 1024 / H.264 Encoding / Prime 95 (15mins tops) / AiDA64 / Real Bench / CineBench
-
-
You couldn't see that Post, your eyes were full of tears ( remembrance of the past.... )
Thanks a lot for the list.ajc9988 likes this. -
-
No doctor anymore at 02:50 AM here...
CPU-Z and HW confirmed 4 Cores @ 4.5 Ghz.
( Huge thanks@ Phoenix for his i7 6700K [email protected] Ghz YouTube Video ).
CPU-Z datas comparison to "standard" i7 6700 K reads: + 8% in 1 thread, + 11% in multi-threads improvement.
DRAM = 1333 Mhz. It is DDRAM: does it mean 2666 Mhz ? If yes, it is very simple to OC the RAM with this Bios
... Then Prema is a Genius !
Large Stress-Test tomorrow night: i'll let you know, Bloodhawk, how it happens.
Thanks again and have a good night.
P.S: if the stress-test exams are passed and taken, can i set the boot to Turbo-Mode only, then
( i didn't in case of a crash, to keep the ability to Bios boot-access again ) ?
Couldn't use ThrottleStop: after download, it read that it didn't fit with my CPU...
What about your GTX 980 OC settings ?Last edited: Jul 27, 2016 -
Chronokiller Notebook Consultant
-
Say hwaatt?
-
Chronokiller Notebook Consultant
Thought you were making a sarcastic self deprecating comment. My bad if not.
Regarding Throttlestop, I made the same mistake. Try the beta version.Last edited by a moderator: Aug 3, 2016 -
Nope, I haven't used ThrottleStop, (3610qm!) but I will give it a shot. What will give me a good hint of power throttling?
-
either processor or gpu clocks down during intense usage when temperature are still below the throttle point.
-
Ah.. got that already . . 72C and throttling that is why I assumed power throttling
-
Hello everyone,
What are your GTX 980 Core and Memory stable OC settings, please ? -
Depends on each card. Mine are in my signature.
-
Now it looks right... no more Mac-poop white... Wonder if this will improve my benchmark scores?
Last edited: Jul 29, 2016katalin_2003, electrosoft, temp00876 and 10 others like this. -
If crappy TimeSpy is attempting a BullRush now, you're well suited with 'El Matador'!
temp00876, Papusan, steberg and 1 other person like this. -
It is the same heatsink as ours. All P75x/77xZM/DM have the same heatsink, if memory serves, except the P775DM. So they do know our pain, except with a skylake chip in it.
Sent from my SM-G900P using TapatalkLast edited: Jul 30, 2016Mr. Fox likes this. -
Meaker@Sager Company Representative
Yes the 980 (non-m) version had thicker heat pipes on it.
ajc9988 likes this. -
-
What are the temps like? You might be able to tighten it up a bit.Mr. Fox likes this.
-
Well all right now, that shiny new red paint job must have helped. Here are some wicked single 980M benches with 'El Cazador' the baby beast.
http://www.3dmark.com/fs/9577601
http://www.3dmark.com/sd/4220429
http://www.3dmark.com/3dm11/11456045
http://www.3dmark.com/3dmv/5491773
-
holy sh*tsnakes! are u really blowing 1.25V through the core there?! dayum...
Sent from my Huawei Mate 8 NXT-AL10 -
Yup, and +1095 offset on memory... (7200MHz)CaerCadarn, jaybee83, ajc9988 and 3 others like this.
-
temp00876, jaybee83, CaerCadarn and 6 others like this.
-
*throws in the towel*
Sent from my Huawei Mate 8 NXT-AL10Cass-Olé, ajc9988, Papusan and 1 other person like this. -
so anyone have the settings for 4.5ghz using xtu? i don't have a prema bios nor have i any idea where to find one haha. i wasnt able to buy from a prema partner as i needed it asap [within 4 days]
-
Get ThrottleStop from the signature of @unclewebb and use that instead of XTU cancerware. You should be able to run 45x4 doing nothing but setting the multipliers all to 45 using stock voltage.
-
-
Meaker@Sager Company Representative
I really can't wait to jump in at this point, it has been so long since doing something serious
-
okay so then
i should probably undo my XTU settings right? and then use the throttlestop settings for the i7 6700 by setting all multipliers to 45 and leaving everything else alone? -
Are the XTU settings working to your satisfaction? If not, go ahead and undo then uninstall XTU and reboot. If the answer is yes, Make sure they are applied and install ThrottleStop. When you launch it for the first time it will adopt all of your XTU settings for all 4 of the CPU profiles. Then go ahead and uninstall XTU.
-
i have no issues with the XTU settings but the voltage is reduced. i don't know what they are by default so if i installed throttlestop, would it know what my defaults were before xtu?
-
Ill just leave this here :
Chronokiller, Johnksss, Prema and 1 other person like this. -
@bloodhawk did the egpu work?
-
Hit a slight speed bump because the 980ti Hybrid needed the case to be open, and the Core wont turn on with out the latch closed. And since the core was new, and not mine, my friend wouldn't let me jumper it.
Gonna try it again once his replacement card comes in.
But looking at this, i dont see why it wont .
jaybee83, steberg, Papusan and 1 other person like this. -
Looking good so far...
Scerate, temp00876, TBoneSan and 1 other person like this. -
-
correct me if im wrong, but the only "hint" that an egpu "might" work in this screenshot is the line that egpus are supported, right? otherwise im just seeing the internal 980 mobile...
did u somehow modify the tb3 drive to unlock egpu support?
Sent from my Huawei Mate 8 NXT-AL10 -
-
Yeap, as Prema said, its a modified firmware. Gonna test with the Core soon.Johnksss, Papusan, hmscott and 1 other person like this.
-
aah ok, now i understand
looking forward to the results!
Sent from my Huawei Mate 8 NXT-AL10ajc9988 likes this. -
Let's drop a Titan X (P) in the P870DM next
I need to go check my firmware version, you're on 16, I thought I was on 18.Sean Hyland and GTVEVO like this. -
I was on 18 as well, but it doesn't matter I think.
-
How about a "modded" tb3 firmware for my 770dm?
Sent from my SM-G935F using Tapatalk -
Not that easy.
-
Not enough unfortunately, a single Titan X(P) isn't quite enough.
SLI Titan X(P) or SLI 1080 seems to be the minimum requirement to hit 60 FPS+ in 4k. -
Single titan XP overclocked is probably close enough from what I seen. xhmscott likes this.
-
Maybe I am being too picky, but the 1080 single wasn't enough, and the Titan X(P) is only 27% faster, that's not many FPS increase in 4k.
The benchmarks I have been seeing, admittedly thin on the ground so far, have shown not enough boost for 4k in many games, but Titan X(P) SLI looks fine.
You can get one Titan X(P), and add the 2nd one later
-
Yeah, definitely, let's see your Titan X(P) 4k benchmarks
Last edited: Aug 4, 2016tgipier likes this.
Clevo Overclocker's Lounge
Discussion in 'Sager/Clevo Reviews & Owners' Lounges' started by Spartan@HIDevolution, Mar 4, 2016.
![[IMG]](images/storyImages/wPZELg.jpg)
![[IMG]](images/storyImages/8BnPEn.jpg)
![[IMG]](images/storyImages/21l2Pj.jpg)
![[IMG]](images/storyImages/FXwBa2.jpg)
![[IMG]](images/storyImages/HoUh1g.jpg)
![[IMG]](images/storyImages/plZTjT.jpg)
![[IMG]](images/storyImages/CiH2ss.jpg)
![[IMG]](images/storyImages/8OwYrG.jpg)