The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Latitude E6510 Memory Upgrades

Discussion in 'Dell Latitude, Vostro, and Precision' started by voostro, Aug 31, 2010.

Thread Status:
Not open for further replies.
  1. voostro

    voostro Notebook Evangelist

    Reputations:
    103
    Messages:
    401
    Likes Received:
    3
    Trophy Points:
    31
    I ordered my e6510 with just a stick of ram to save $$ and plan on upgrading the ram after it arrives asap.

    I am looking for real life experience from others (or some seriously solid info) who have put in either 2 sticks of 2gig 1066 or 1333, or 2 sticks of 4gig 1066 or 1333.

    What Ram worked just fine ??? and what Ram didn't ?

    Mushkin ? Kingston ? G-skill ? or ????

    Changes to the BIOS ??

    any voltages not good or are mandatory ?

    any tips or info would be greatly appreciated !

    (i do know that my cpu caps out at 1066 but also that 1333 will downclock)

    bonus if you know particulars of the HM57 chipset and how it plays out with Ram lol
     
  2. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,839
    Likes Received:
    2,154
    Trophy Points:
    581
    The only words you need are DDR3 SODIMM.

    I put 2 x 4GB OCZ3M13334GK into my E6410 (it was the best deal I could find for this type of RAM in UK). It's running at CL=8 at 1066MHz.

    John
     
  3. voostro

    voostro Notebook Evangelist

    Reputations:
    103
    Messages:
    401
    Likes Received:
    3
    Trophy Points:
    31

    thanx m8

    ;)
     
  4. voostro

    voostro Notebook Evangelist

    Reputations:
    103
    Messages:
    401
    Likes Received:
    3
    Trophy Points:
    31
  5. Bussuhnut

    Bussuhnut Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
  6. Jedis

    Jedis Notebook Consultant

    Reputations:
    0
    Messages:
    183
    Likes Received:
    0
    Trophy Points:
    30
    I don't think that will work, it's PC3 8500.
     
  7. Bussuhnut

    Bussuhnut Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    if it was PC3-10600 do you think it would?
     
  8. tvicious88

    tvicious88 Notebook Enthusiast

    Reputations:
    0
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    5
    Save money and get 1066, G. skill is very reliable. Any brand on newegg that has good marks will work though. Go with 2x2, likely you wont need more than 4GB in the lifetime of that notebook.
     
  9. sgogeta4

    sgogeta4 Notebook Nobel Laureate

    Reputations:
    2,389
    Messages:
    10,552
    Likes Received:
    7
    Trophy Points:
    456
    The dual core i series only supports up to DDR3-1067 (PC3-8500), getting any faster memory will downclock the memory.
     
  10. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,839
    Likes Received:
    2,154
    Trophy Points:
    581
    It will work fine and so will PC3 10600. As already noted, Intel have, for reasons unclear to me, fixed a speed limit of 1066MHz if running a dual core CPU. However, memory modules contain timing data for several different speeds and the BIOS figures out the fastest speed supported by all modules.

    I would also note that close integration of the memory controller with the CPU results in much improved memory bandwidth compared to the previous generation.

    John
     
Loading...
Thread Status:
Not open for further replies.

Share This Page