1810tray

update 12:
-some bugs fixed
-removed the not working "veryhigh" hex value for AC (it use now native (0x00) instead)
-added Profile manager ;o)

download in 1. post

have fun
inteks

 

I`m about to install a Intel X-25 M SSD.

Should i use the HDD Powersaving mode or not with the SSD on?

 

if the ssd support powersaving then "why not"
if not, it doesnt make a diffence

you can check it with hdparm at commandline.

 

Thanks inteks, and btw big thanks for the awesome update

 

inteks, your utility surely ranks near top of making our 1810t experience nearly flawless one! Thanks a bunch.

In the latest rev. I notice you've included enabling/disabling an accelerometer... did you have some other model in mind, or does the 1810t actually has an accelerometer?

 

http://forum.notebookreview.com/showthread.php?p=5502634#post5502634

 

i try to make the devices customizable in next release ;o)

 

it would be nice to add a checkbox for starting 1810tray automatically at windows startup

 

Is update 12 compatible with bios 3120?

 

Sure , why wouldn`t it be?

 

Well it doesn't work for me anymore after updating bios and a few drivers updates as well. Asking is much easier than reinstalling everything

 

is version 11 still working ?

 

It loads, but on left or right click it gives .net error so it is unusable too. Version 12 doesn't even load, windows report immediatly after clicking that app stopped working. yday, before updating v12 gave simillar .net error after it loaded, but it still worked afterwards.
I am running w7 64bit, if you need any other info about my config let me know (or crash log if one can be made).

 

Actually, I too suffered .net related crashes when I played with profiles. It seems to have created a profile by itself, but clicking on it splashes a .net crash error and quits the program (I can't even delete that errant profile). I have since left the profiles alone and it otherwise seems to work. I also couldn't get the different display resolutions to appear/switch in the right-click menu. None are big gripes, I am more than happy that it does its fundamental job well -- the "very high" corresponding to the "native" fan speeds is a welcome addition.

 

After the Bios update to 3302 and a fresh install of win 7, since i changed to a X25-M Intel SSD (!!) the program doesnt work no more

I get the same .Net problems

 

Double post , forum gone crazy please delete

 

Double post , forum gone crazy please delete

 

I get the same .Net problems
At first, 12 is loaded. but after setting options, it crashed with .Net message.
after this problems, 12 doesn't even loaded.

so I downloaded 11, and it loaded.
but any click(left, right) call .Net messge.

I am running with win7 32bit.

thank you

 

Oh god , i never realized that your little tool was so important! I started using it the moment i took the PC out of the box, and now that i can`t -because of the crashes- the fan is driving me crrrazy!

So please let us know about a fix or something, we need our drugs

Thanks a lot for all your effort!

 

i get the same error on a fresh install

quick fix is to delete regkey "current_user\software\inteks.org\1810tray\"
im working on an new version,.

/inteks



ps: before clicking on "saveprofile" type a name for that profile into the textbox to prevent this error

ps2:
update 13:
bug fixed


see 1. post

 

bug fixed and first post updated

 

update 13 is good
thank you

 

update 13:
bug fixed

see first post for download

 

Works now, thanks.

 

We just love you

Thanks for your awesome job!

 

yepp i second that...

i just read about everything and tried to find out how to put it in my autostart menu... but it won't work

how are you starting this amazing little programm?

thanx...
Angelo T.

 

I`m using spybot search & destroy and from its advanced menu i have access to what programs are allowed to start with windows.

I just added the 1810Tray too

Easy peasy

 

Those asking for autostart.. Is it that hard to drag the program into your startup folder in the start menu?

 

That doesn't work if you still have UAC enabled.

 

i have UAC disabled myself thats why i dont add a autostart option.
if i would add this option it would be the same shortcut into startupfolder solution that doesnt works for you because of UAC.
if you have problems with uac ask microsoft for a solution. or simply disable it

 

Hey there
amazing program... but only theoreticly unfortunately. With WinXP32 1810tray vers13 i get the following error:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.EntryPointNotFoundException: Unable to find an entry point named 'PowerGetActiveScheme' in DLL 'PowrProf.dll'.
at AcerEC.PowerGetActiveScheme(IntPtr UserRootPowerKey, IntPtr& ActivePolicyGuid)
at AcerEC.CurrentPowerscheme()
at _1810Tray.Program.ShowContextMenue()
at _1810Tray.Program.notify_MouseUp(Object sender, MouseEventArgs e)
at System.Windows.Forms.NotifyIcon.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.NotifyIcon.WmMouseUp(Message& m, MouseButtons button)
at System.Windows.Forms.NotifyIcon.WndProc(Message& msg)
at System.Windows.Forms.NotifyIcon.NotifyIconNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
1810Tray
Assembly Version: 1.0.0.9
Win32 Version: 1.0.0.9
CodeBase: file:///G:/Setup/1810tray.13/1810Tray.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

The fan is still quiet afterwards and the temperature is displayed after clicking continue after getting the error. It occures on the right and left mouse button.

 

@numbi

should be fixed in version .14 see first post for download

 

inteks quick question

I got a SSD installed, and even if i use Balanced/Power Saved/High Performance i can`t check HDD Fullspeed

Could this be slowing down my HDD?

Oupsie, didn`t see the updated 14 version

Thanks!


EDIT: Just started using the 14version but i still see the HDD Fullspeed option. I guess windows doesn`t recognize my SSD? That`s weird.

 

pls do a "hdparm -i hda" in a commandline in your 1810tray folder and post the output

 

There you go

 

that is not what i expected. 1810tray normally hide the HDD menuitem if hdparm result contains "AdvancedPM=no"

i expected to see something diffent from your SSD.

are you sure you start 1810tray as Administrator ??

 

Yeah administrator mode it is.

What should i expect? And do you mean that something is wrong?!

 

inteks please add a PayPal donation button to your program or include link on the first post. I'd like to send you a couple dollars as a thank you for the effort you put into developing this amazing tool And I'm sure I won't be the only one!

Thanks again for the 1810tray!

 

no. nothing is wrong with your ssd

but 1810tray does a "hdparm -i hda" at progammstart and if the result contains "AdvancedPM=no" the "hdd fullspeed" menuitem is useless and so 1810tray hides it from menu.

you said you see the "hdd fullspeed" menuitem so i expect something different like "AdvancedPM=yes" or something else.

but if everthing else works you can ignore it

is there someone else with SSD having the same problem ???

/inteks

 

Hi inteks
Thanks for the great app
I've got the same x25 m G2 SSD and 1810tray does not hide "hdd fullspeed" !!

 

can you pls post your hdparm output too.

if possible do a "hdparm -i hda > result.txt" and post this file. maybe there a some speciale characters inside . . .

 

You won't.

 

Another question, I had 1810 tray loaded and after several hibernations (battery around 20%) after resuming from hibernation, I got the message that battery has had it and needs to be replaced. After I emptied the battery (normal use) and connected laptop to the charger it didn't charge to full even after a couple of hours. I turned on the laptop (battery stuck at ~90%) and display was corrupted as if graphic card would have been overclocked too much. Restarted and I didn't load 1810try, after that no problem, battery charged to the full and no errors. Can this be corelated or was probably just random issue?

 

Seems pretty random to me. Nobody else has reported such a problem. Only thing was that some ppl had graphic distortion after hibernation/sleep mode due to the newest Intel Graphic Drivers.

But the new 3303 bios is supposed to fix them

What version are you currently running?

 

3120, I will try the new one.

 

big thanks to Prikolchik for donation !!!

 

as far as i know 1810tray doesnt contain any code that can do something likr this !!!!

 

i added a setup as testversion. its the same as version.14 but with autostart shortcut .

have fun
inteks

 

big thanks to Delmeister for donation too

 

Thanks Inteks for the 1810tray tool !

I bought the 1810T (su 7300) -- I do not find the fan anoying even at top speed... did I got lucky ?

I have a few bugs...

1- the only way I can get it to start is to lower the UAC.. setting it to run as admin at startup or run as scheduled task does not do it without being prompt to let it run

2- what is the costum resolution trick ? only first resolution is available, i did try to change the list separator in "regional settings " from " ; " to " , " as set in your display option with no luck !

3- profile will not stop or start WIFI, selecting device will not do anything

Wishes : would be nice to have check box in front of selected profile.. and/or floating info like we can see for battery status and fan speed


I bought the 1810T (su 7300) -- i do not find the fan anoying even at top speed... did i got lucky ?

I use the gadget that looks like speedometer for cpu and memory usage, can someone recommand a tray tool for that ?