i have one on 3dmark.com...![]()
yes sir
what stevie said..![]()
-
steviejones133 Notebook Nobel Laureate
I dont think ive seen anyone OC their 6990's to over 875 core....seriously overclocked figures there......anyone got a spare egg to fry??? - what are your gpu temps like with those clocks?
-
nice and cool.
-
John set a block of dice on those cards you might be able to pull a 900 core
-
steviejones133 Notebook Nobel Laureate
-
got the cold air blowing right now.
-
cookinwitdiesel Retired Bencher
You leave me no choice john......to the freezer!
-
you guys left me no choice..dual heat pipe!
-
I am about to blow some minds ...
Ok this is going to take some time, apparently 3dmark 11 is being a again so I have to upload pics to photobucket before i can post screens instead of giving links ... grrrr
But impressiveness is incoming
If anyone can get it to work ...
http://3dmark.com/3dm11/1654559;jse...11/1654559?key=xLwbmv68dXUXPUm2qRxzC5dTNk5kw3
If not, screen caps, gottu grab some food for the woman first, but I have done some intensive testing... -
CptXabaras Overclocked, Overvolted, Liquid Cooled
-
So stock for stock what are the differences between CF6970 and 6990 given same CPU? Has that been established? Early predictions were 25%
-
cookinwitdiesel Retired Bencher
-
10-15% at most
-
Hmmmm seems like more? Maybe I am not pushing My OC enough. I think I am doing 850/1050 and only getting like 7400 3dmark11. Maybe my 2720 is holding back....
Stock clocks are 6400ish all sliders to the left... -
It's not more, look at stock Vantage GPU scores.
-
My bad, it's actually 15-20%, sorry for the confusion.
-
-
OK ... heeeeereererere we goooooooooooo.
Clocks 865 1175
Overall score 7770
GPU Score 8917
Clocks 865 1200
Overall Score 7786
GPU Score 8958
Clocks 870 1200
Overall Score: 7815
GPU Score 8998 !!!!
Thats it folks ... 7815 GPU 8998,
All with a 2630 -
P27597 was my best. I think Johnksss is KING of the 6990m hill. Good Job.
http://forum.notebookreview.com/alienware-m18x/574780-official-alienware-m18x-benchmark-thread-88.html -
Ok ... for a little bit of the process.
Driver: 11.7 (haven't installed any CAPs)
Room temp: quite cold, its the room with my AC in it, set to 62 F
OCing Prog: Sapphire Trixx
Clocks: as I noted 870 Core 1200 Mem.
Fan Control: HWinfo64, Fans set to max
Other Mod Programs: Game Booster (this adds a few points about 100 last I checked, at least on my system, on others with lots of RAM and CPU power, it might not)
The process: HWinfo64 WILL LOCK your computer, BUT, you can get off 1 run on every boot.
I reboot the computer, exit Alien FX, Start HWinfo64 and crank the fans to max, turn on my Overclock settings with trixx, then run Game booster. Wait a few seconds for the fans to get the system as cold as possible, then run 3dMark 11.
I do not run anything else, including GPU-z. On some screen shots I have turned it on afterward just to log my Clocks although Trixx would have done this as well I suppose.
You can not run another bench after your first one, 3dMark11 Simply hangs, you have to reboot. However, HWinfo64 will make your reboot hang as well. So you have to hard power off. Then restart the process and up your clocks a little.
Hope this helps some peoples out there... Its annoying and takes forever to have to shut down and reboot between runs .. especially when pushing your limit when the runs fail on you ... but there it is. -
Phenomenal Work... I'm in auh..... I bow to the masters and here is my rep point. -
cookinwitdiesel Retired Bencher
Those reboots and taking forever....that is where an SSD comes into play, not for the benches but the constant rebooting that benching and overclocking requires haha
-
Agree scook. Which is why i paid $95 for a 40gb ssd. Only had to RMA it once
. ..So far
-
Will rep u when the system lets me.
-
i rep'd him for ya'll...
good job!
side note:
i got 5 ssd's now. can't live with out them...
side note:
sam, can you run some wprime 1.55 and see what the max multi is? thanks. -
Lol. I have 5 ssds as well. 2x256 2x160 and 1x40. Been meaning to get another for my wifes notebook, but than again, she wouldn't appreciate it.
-
cookinwitdiesel Retired Bencher
First I am trying to figure out why Crysis benchmark keeps crashing
-
-
cookinwitdiesel Retired Bencher
I keep crashing at the start of the 2nd run out of 3
Very annoying -
was crashing just trying to run it.
-
Though she uses the R2 when Im not hogging it Haha.
Also, +1 Shaden, Nice job! -
cookinwitdiesel Retired Bencher
John, mine is hanging at 3.9 for like 2 seconds then dropping to 3.8
All multis are set to 42
I am also hanging in the high 80s low 90s with room temp cooling (I have the 2 pipe heatsink from dell stock) -
By chance, did you remember to set Crysis benchmark to use Vista SP2 compatibility mode? If I don't do that it either will not load or crashes.
-
cookinwitdiesel Retired Bencher
I did not do that but also have never had too. On the exact same install of windows and all programs it worked fine with the 6970s, with 6990s i get crashing
-
ok, that's what i wanted to hear..
i was debating on grabbing the more expensive cpu, but if you cant run all 4 cores at 4+ ghz...then no sense in me grabbing it then... -
cookinwitdiesel Retired Bencher
Why you think it is limiting us? Temps? Throw that SS on there and find out for us
Nvm....I see now, it is TDP, we are hitting that 80W limit in the bios with 3.8
Update: damit.....actually drops to 3.6 eventually! (and 74W) (although this one MAY be due to temps....) -
I've always had to do it, on my M1730, R2 and the M18x... funny how some systems are different than others. Anyway, BDRacing was hitting 100FPS with his system... Here's the run I just finished.
-
seems to be no way around that.
-
cookinwitdiesel Retired Bencher
Not until we can increase the bios past that 80W limit, nope. Looks like we will have a pretty even playing ground on the 2920xm....everyone gets 3.8 GHz
Just like the D901c all over (might as well be)
So instead of sitting in the basement like a hermit....I am looking at getting another chest freezer, just a little 5.0 ft^3 one for dedicated benching lol - only $179 at home depot! I can afford that in like a month and a half.... (broke from just getting an engagement ring) -
well congratz on that!!
-
cookinwitdiesel Retired Bencher
Thanks!
Being poor is no fun though haha -
it never is..
-
Scook I have one of those, ... can you really put this beast in the freezer and still run it !?!?
-
get ta benchin' -
hahaha I think the time I put in today was enough ... but there is tomorrow ..actually its a bar fridge with a freezer in the top ... but I wonder if this thing will even fit in it ... ???
Anyway ... does anyone have a link to the discussion about OCing the 2630 ??? I think I want to do that tomorrow tooI know there was a discussion here about it ... but the search on these forums blows ...
*edit Got it ... -
-
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Now thats what I'm talking BOUT!
Awesome Johno!
Cheers. -
-
@johnksss: Wow, now that's a M18x benchmark... been waiting to see such scores
*OFFICIAL* Alienware M18x Benchmark Thread
Discussion in 'Alienware 18 and M18x' started by BatBoy, Apr 30, 2011.