*HP dv6t & dv7t Select Edition / Quad Edition (6XXX series) Owners Lounge*

BIOS Revision F.07. I didn't see a revision date.

 

Thanks for clearing that up. Mine was one of the first dv7tqe to ship and came with F.05 ...

 

Well I finally received my DV6Tqe 6xxx CTO (BIOS Rev F.07) in and I have so say my initial opinon is that I love it! First impression out of the box was that it had a nice brushed finish (that LOVES fingerprints). Right away I decided that the crapware was slowing it down and I decided to do a clean install so I used the following link to download my own legal windows 7 64x iso.
http://forum.notebookreview.com/win...-7-download-links-just-like-vista-before.html
Burnt it a DVD using Alochol 120.
Downloaded the updated Intel 6X chipset management drivers via:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&ProdId=816&lang=eng
Then burnt the above intel drivers and the swsetup folder to a DVD for preparation of a clean windows install.
Booted from the win7 dvd, deleted all partitions (except the 200mb one), created a new partition utilitzing the full drive and quick formated it. Installed a clean windows 7 64x Home Premium (using my original key on the bottom of the laptop). Installed the downloaded intel chipset drivers. Installed all swsetup\drivers from the swsetup folder with the exception of the BCBT7 (bluetooth drivers) and myWAN3 (see below). When I attempted to install the BCBT7 drivers I got the following error: "No bluetooth device was detected". I have nothing in Device manager that shows any problems. The issue I had when attempting to install the myWAN3 drivers was I couldn't figure out how to install it. I double clicked on setup and got a blank "dos" command line box that did nothing.
Bluetooth was listed before the clean install in control panel and it isn't there now. My laptop also "freezes" ocassionally for 30-60 seconds randomly (believe it did this prior to clean install), then resumes as normal.
My questions are what do I need to do to get bluetooth working?
Any ideas on the freezing?
Recommendations on a good drive image software so I can burn my clean windows install to DVDs, boot from them and restore in the future?
Thanks for your help in advance!

 

Just got back. It arrived with an older version of the bios. I ran the HP Support Assistant -> Maintain. It downloaded a bunch of drivers and the bios. It rebooted, I hit esc, then f10(I think) to go into into the bios setup. I found the virtualazition stuff but it was disabled. I didn't look at it before the update to see if it was there previously.

 

Gotta love it...mine was just the opposite.

 

I also tried running HP Support Assistant -> Maintain. But it didn't download any BIOS. You may be lucky to get it.

 

Here is the snap of the bios version (fn-esc) and hp update history

Here is the output from the ms HAVDetectionTool someone posted earlier

 

Wow...now THAT is good to know. Still waiting on mine BTW.

 

Don't take my word for it but I thought I read in one post that the instructions for the update say that you must uninstall your current driver prior to installing the new.

 

What type of cooling pad would you guys recommend for the dv6t?

Also, can someone summarize the ventilation system? I don't really know where air enters and leaves.

Thanks

 

Well,does select edition mean HP Pavilion dv7 (4xxx) series too is included in this forum?

 

So, I've noticed something that's been really bothering me. Whenever I watch video or play a game on my DV7t, I'm getting this horizontal line/split in the image. It almost looks like the upper fifth of the image isn't refreshing as fast as the rest of it.

Is anyone else seeing this? Any recommendations? Thanks.

 

hi,
You are right, i just found the link and tried to pass that info. But didn't think of posting the link will be something wrong. I should have tested it first.
Some one replied me that its giving issue. I tried it and i did get the same issue. After lil investigation i found that, the link given is a patch to a purchased version of a software, BioExcess from egistec.com. The site has a 7 day trial version of BioExcess and BioExcessPlus. I tried BioExcess and it did work for me to open firefox 4.0 and fingerprint scanner is recognized by this software.
But, this is of no use. Sorry for the quick copy paste. But, learned a quick lesson.

 

This is for the 6000 series, which were just released Spring 2011.

Higher end umber colored 6000 series were released mid March 2011.

 

What part # did you order?

Manufacturer Part# 62230AN.HMWG ?
PROVANTAGE: Intel 62230AN.HMWG Centrino Advanced-N 6230 Wifi Half Mini

OR

62230AN.HMWWB ?
http://www.provantage.com/intel-62230an-hmwwb~7ITE90Q5.htm

 

hi,
First of all please accept my apology which caused you this inconvenience.
i just found the link and tried to pass that info. But didn't think of posting the link will be something wrong. I should have tested it first.
I tried it and i did get the same issue. After Lil investigation i found that, the link given is a patch to a purchased version of a software, BioExcess from egistec.com. The site has a 7 day trial version of BioExcess and BioExcessPlus. I tried BioExcess trial and it did work for me to open firefox 4.0 and fingerprint scanner is recognized by this browser.
But, this is of no use. Sorry for the quick copy paste. But, learned a quick lesson.

To get back to hp simplepass2011, you should uninstall the installed version of software from egistec link, and click on start and type recovery manager in the search box. It will show up the recovery manger in results, click on it and select the drivers and software option(1st) and it will show all the drivers and softwares to reinstall, go to software section and click on hp simplepass 2011 and click install. You have to restart the computer and before restarting please save your work and click OK. HP simplepass2011 will be installed and will get a prompt for scanning the fingerprint in IE after restarted.

Hope this helps. Once again sorry for the inconvenience.

 

i just found the link and tried to pass that info. But didn't think of posting the link will be something wrong. I should have tested it first.
Some one replied me that its giving issue. I tried it and i did get the same issue. After lil investigation i found that, the link given is a patch to a purchased version of a software, BioExcess from egistec.com. The site has a 7 day trial version of BioExcess and BioExcessPlus. I tried BioExcess and it did work for me to open firefox 4.0 and fingerprint scanner is recognized by this software.
But, this is of no use. Sorry for the quick copy paste. But, learned a quick lesson.

 

Did you update the graphics driver with Windows update?

 

Please stop posting multiple times of the same thing.

 

Hey Guys just fyi

I recieved my laptop today from hp and was following the "out of the box guide" in the forum and I need to warn you guys that uninstalling the the HP Support Assistant will ALSO uninstall the HP COOLSENSE software.

I don't know whether anyone already knows this or not but I was looking for drivers and such for the last hour when really I just had to reinstall the HP support assistant thing.

 

I have heard a lot of talk about this coolsense software. What exactly does this do for you? Is this software not contained in the SW folder that everyone saves or is that just drivers? I guess the Coolsense software is not available for download on its own and you have to have support assistant to have it. That is a strange way to have that set up I think.

 

Owners, how is the sound system on the DV6t ?

Speakers are solid?

is it too quiet? Sound over headphones, does it hiss or crack?

 

The sound system on the dv6 is good with Beats Audio turned on (provided you are playing good audio source). And, the sound over headphones, even better. I specifically liked the Movie preset in Beats Audio Settings. With headphones plugged in and Beats Audio turned on in Movie preset, I keep the sound level between 20-25%, which is loud enough for my ears. Also, I haven't experienced yet any hiss or crack.

 

great.

Does the dv6t has a built in subwoofer like the ENVY model?

 

dv6t has quad speakers but no subwoofer. dv7t has a subwoofer.

 

Does anybody have an idea on how much the dv7-6000 costs? It is not even listed in HP website and the closest one i found about it says nothing about the price !

 

I believe so. Should I not have?

 

The 6000, The 6 means the generation 000 is the variant. Since its 000 means CTO, which is Customized to Order.

Starting at $1,099.99 which is right off the HP Shop section.

 

Heck ! I should have known about it earlier , i wanted a CTO laptop and just ordered a HP Pavilion dv7-4295us which has exactly the same specs and is exactly the same cost ! But the 6000 series has a better graphics card which would have been extremely great for me

 

You need to move to the dv7t if you want a subwoofer... The sound is better with it, but I think my Dell 1747 w/ JBLs still had an edge as far as sound goes.

 

The 6000 series also has 2 USB 3.0 ports that the that the 4295 doesnt have and the 4395 has no SATA III(6Gbps) ports available. They are all SATA II(3Gbps) ports. That is why I returned my 42995 unit for the custom 6000. If you are within the 21 day return window you could get an RMA from HP and order a CTO pavilion.

 

Well,excuse my ignorance,but what exactly is SATA II and III for ? Whait is the difference between them?
P.S- I dint even get my hands on the laptop yet but ordered and even if i return it as soon as i get it,wont they ask for a proper reason? And how long will the process take before i finally get the 6000 series? I need one before May 20 !

 

Anyone elses F5 button, not refresh?

 

SATA III allow for faster data transfer rates, up to twice as fast, however others may be able to help you out with that more.

As for receiving your laptop by May 20th you may be out of luck, or I should say the chances are low that you would receive the 6000 series by then, I ordered mine on April 23 and it has an estimated build date of May 23.

 

OMG!! Well,the SATA III is then not going to be a deal breaker for me and also,they build the 6000 series? i thought it was a ready to buy,in stick model always ! I am quite happy with the dv7-4295us i ordered Only problem is the graphics card :/ So badly wish there was some chance for me to upgrade to the 6770M card

 

The SATA III port is a type of harddrive interface which allows a higher data transfer rate than the SATA II port. SATA II ports cold be a bottleneck if you wanted to put a very fast Solid State Drive or a new High speed SATA III HDD. I do not think there is a reason required to return the unit prior to the 21 day period from the date of delivery. I think you could tell them anything like i need SATA III or dont like the video card. The 20th is a long shot for a order date of today I would say. I ordered my notebook on the 25th April and It is flying to me now shipped on the 4th may but I sure was surprised to see it ship that quick! It was scheduled to ship May 23. Most have not been shipping that fast.

 

Uh oh,i am not willing to risk it and also have no plans on using the SSD ! Thanks,you have been a real help !

 

What kind of specs do you have on your order? Just wondering because your now the second person I've seen that has shipped quite a bit earlier than expected, and I am quite impatient..

 

Here it is...

dv7t Quad Ed
• Genuine Windows 7 Home Premium 64-bit
• 2nd generation Intel(R) Quad Core(TM) i7-2820QM (2.3 GHz, 8MB L3 Cache) w/Turbo Boost up to 3.4 GHz
• 1GB GDDR5 Radeon(TM) HD 6770M Graphics [HDMI, VGA]
• 8GB DDR3 System Memory (2 Dimm)
• 640GB 7200RPM Hard Drive with HP ProtectSmart Hard Drive Protection
• No Additional Office Software
• FREE Upgrade to Norton Internet Security(TM) 2011 - 15 Month Subscription (activation required)
• 6-Cell Lithium-Ion Battery (standard) - Up to 5.25 hours of battery life +++
• 17.3" diagonal HD+ HP BrightView LED Display (1600 x 900)
• FREE Upgrade to Blu-ray player & SuperMulti DVD burner
• HP TrueVision HD Webcam with Integrated Digital Microphone and HP SimplePass Fingerprint Reader
• Intel 802.11b/g/n WLAN and Bluetooth(R) with Wireless Display Support
• Standard Keyboard
• HP Home & Home Office Store in-box envelope

 

I'm curious about this as well. I was thinking about getting this Newegg.com - Thermaltake Notebook cooler Model CLN0008

 

Do a FN key F5 (or any other F key) as the default is for it to use the Function (ie the help, dual monitor, volume etc) rather than the function key behavior. There is a way to toggle this, but I haven't had time to look it up.

 

What do you think of passive coolers, like Newegg.com - Antec Silent Passive Cooling Model Notebook Cooler Basic

or

Amazon.com: Xpad Slim (Non-slip Laptop Cooler and Heatshield): Electronics

 

Have you turned off the function keys? If the F5 doesn't refresh by just pushing it try the combo keypress of fn+f5. If that works then you need to disable/enable the function keys in the BIOS.

 

My initial impressions of the dv7t (See my sig for specs).

1. Screen - I don't have a problem with the screen. I come from a 2006 1600x900 Toshiba that I feel is similar. I used a matte screen on that one. This one is glossy. Viewing angle isn't an issue for me.

2. Build Quality - This is probably my main concern. I felt that my 2006 Toshiba had a better build. I noticed the gaps between the metal face and the plastic bezel. I guess this is where the cost was kept down. For me it isn't a deal breaker but I think this would be my only complaint.

3. Installed an 80 GB SSD and moved the 7200 RPM 640 GB drive to the second bay and this thing is fast. Lowest score from the Windows Experience Index is 6.9 for video. Performed clean install of Windows 7 Ultimate and put only a few of the HP items back. So far no issues.

4. Installed COD: World at War and can run it at full resolution all options on and it is playable.

 

Anyone with a blu-ray drive in their DV7 notice anything odd? For some reason nearly every time I open a video or audio file with WMP11 the blu-ray drive initializes (you can hear it, even with no disk in the drive), which causes WMP11 to freeze for like 5 seconds. Very annoying. I also hear the blu-ray drive initialize randomly (very infrequently) when I'm just doing normal surfing/working.

 

Sounds like a Windows Media Player issue to me. What do you use that program for? Give Zune, VLC, and/or DoubleTwist a try.

 

Ok so I did my first clean install on my new DV6TQE last night. Went well but was worried. Anyway, I went through the driver thread and I installed everything. I still feel like I'm missing some stuff though. When I change the volume, the beats logo doesnt pop up anymore, and despite being installed, I cant find any of the ATI software to switch from the intel gpu to the 6770. Is there a program I can download that can automatically download and install all of the required drivers? I actually re-installed hp smart advisor or whatever it is because it had a list of all the drivers and hardware on my pc but it shows that there arent any updates I need to do. Any guidance? Also plan on doing a little review after school...

 

http://forum.notebookreview.com/hp-...xxx-series-owners-lounge-359.html#post7419834

 

I use Media Player Classic mostly, but I still find this issue vexing. I was curious to see if it was happening with anyone else. The actual blu-ray drive reads disks (DVD,blu-ray movies, etc) and burns DVD-Rs fine.

 

hello every1

i've bought hp pavilion dv6 and it works great



my question is

i rarely use the dGPU and always work on the iGPU

how to make the integrated gpu intel hd 3000 to be the default graphics card ?

because when i shut down the notebook and turn it on again it switches automatically to ati 6770 !!