The Official MSI GT73VR Owners and Discussions Lounge

Anyone help me please? I dont wanna rma without reason want to make sure its not "defective"
@Phoenix

 

New BIOS for the MSI GT73VR Titan Pro is out: E17A1IMS.319

http://forum.notebookreview.com/thr...itan-pro-drivers.800622/page-25#post-10540944

 

Did you try it out?

 

yup, installed just fine, after the flash it was stuck for about a minute on a black screen, I got a bit scared but I just left it alone and it booted, I then went straight into BIOS and re-setup all my settings and overclock and switched from AHCI back to SUPER RAID 4

 

New BIOS out for the GT73VR 6RE also. E17A1IMS.10C - Optimize the Output Color Depth setting for the display panel.

 

Temps while converting a video from 3D to 2D mode @ 4.2 GHz on all cores / 3.9 GHz Cache Ratio using Liquid Ultra!

 

Run 3DMark's Timespy benchmark a few dozen times. If it doesn't shut off the laptop and reboot you should be good.

3DMark is free on Steam.

 

Thanks a lot gonna try it now im having this laptop since sunday i experienced restsrts only after windows update i went back to factory and tried it again but same again i just hope my hw is ok gonna run those tests and eill ppst results. Cheers

 

What temps were you getting before the liquid ultra?
I think I have high temps, downloading 3d mark now to verify.

 

I did factory reset. Before i did recovery with installing windows. Im gonna download 3d mark and see what will happen after couple of tests. Also does it test cpu as well? How can i check if its not a ram? When its always restarted a mouse froze for a second and then blue screen and unexpected error.. Hopefully now it wont happen after new factory reset... But today after cold boot i turned on forza and fps was about 35 then i restarted and it was as usual 60-80 I was using desktop driver latest nvidia. Thx @Arestavo for suggestion

 

I'm having a problem with Windows 10. I tried to scheduled a Disk Check but it doesn't run on system startup. I get a notification to restart my computer to repair disk errors and every time I restart my system it fails to run disk repair.

 

To check your ram, right click on the windows icon in the bottom left, click on search and enter memory. Click on Windows Memory Diagnostic and select Restart and check for problems. You can read some more detail here. http://www.techrepublic.com/article...lems-with-the-windows-memory-diagnostic-tool/

 

Open a command prompt and type ,or paste, sfc /scannow.

 

@Phoenix

I got these scores in timespy 5303 and firestrike 13414. Are these at par for this system?
I am also attaching the hwinfo screenshot for sensors



EDIT: updated results after setting turbo mode to 41x and and GPU to 200MHz
TimeSpy and Firestrike

 

I haven't saved a Timespy run, but the Firestrike looks about right.

My machine got 12867 on stock settings. Your CPU's speed bump probably accounts for the difference.

 

Before liquid ultra temps were 92-93C, now they're in the 78-82C range under max load

 

Here are my results for you to compare:

http://forum.notebookreview.com/thr...o-425-review-by-phoenix.801314/#post-10457265

 

The first set of score is with default settings and the second set with turbo mode. I also turned on cooler boost so the average temperature were down by few degree. High's din't go up.

 

Man your HWiNFO is so confusing, download this reg file then double click on it, then launch HWiNFO to get the best layout (credit goes to Mr. Papusan AKA The Snow man)

Papusan HWiNFO Recommended Layout/Settings

 

Thanks did not know about this.

 

ive got 2000+ in time spy, qith gtx 1070, stress test with xtu 10 minutes no throttling cpu maX 90.
is this time spy score ok for my model isnt it too LOW? thanks everyone, no restarts for now but cpu temp stAY high all the time around 60-70 when im just browsing

 

And what happens if the CPU fan speed is at 100%? Use the coolerboost button. You shouldn't have 60-70C CPU speed if you are not overclocking.

 

That was stress test, is a time spy resulrs allright? I scored average 5000+ but cpu is around 60-70 when i go 4,2 in dragon it goes up to to 80+ i need some more tests with games as well and see havent got a chance yet i will do some gaming tomorrow thx man
@Falkentyne ,nope, stock speeds just watch yt and cpu temp jumps from 50-63c and between... its not normal when im even not playing. gpu is very cool tho

 

But now yoo know

 

New BIOS released for GT73VR-6RF.

https://www.msi.com/Laptop/support/GT73VR-6RF-Titan-Pro.html#down-bios

Description Optimize the Output Color Depth setting for the display panel.

 

well cpu oc -50 mv at 4.0 seems stable with 60+c ..
is that gpu memory ok? 2000 doesnt seems since i updated dc and driver after fc in dc gpu shows now 1442 mhz or im panicing again lol

 

Can anyone tell me what does USB boost and storage boost does in Dragon Center?

 

They keep the controllers "active" to minimize latency. Doing this, however, costs performance as it actively uses the CPU to keep everything "running" in a just in case situation. Honestly not worth it, and you do loose performance.

 

Guts I updated the BIOS to .319 but it says the relase date 2017-5-5 !! butin website is 2017-6-6 !!

somethingswrong?!

 

The Bios compile date is NEVER the same as the website release date.
Website date is when the bios is posted on their website, NOT the day it's compiled in their engineering department! Most likely this Bios was made over a month ago.

 

After a potential new release is built, it needs to go through testing to make sure that not only has it fixed the bugs that build addresses but that it also hasn't broken something else - MS's famous for that trick

That's actually pretty quick, 30 days from build to release.

There are quicker customer specials possible, days in between - or even hours - depending on issues involved - client down situations - but general releases will go through a testing validation process.

Usually the name of the BIOS will be the build date, the date of upload for that new BIOS download may be shown but isn't related to the build date.

 

Anyone could help me....

I set VR on 400 in bios.

I set 41 (CPU) and + 100 +200 (GPU) in turbo mode of Dragon Center.

It's OK

But in XTU:

Processor Core IccMax 75A change to 100A

Core Voltage Offset 0 change to -50mv.

When I click apply, I got blue screen and settings are reset to their default


Envoyé de mon iPhone en utilisant Tapatalk

 

So i did a stupid thing,
I updated my BIOS via device manager to .319 on previous month, but I though that is microsoft update and I shouldnt use that!
But now I understand , that one was this one

 

It means the settings you are using are too aggresive and you are not stable. Don't undervolt so much, go slowly and test each decrement. If you run into bluescreen, the settings are unstable and have to go back to testing.

All CPUs and GPUs are different. Some are able to go at high speed with low undervolts, other can't reach as high overclock, nor can they undervolt to be stable.

 

It would help if you told us what MSI you have and what CPU you're talking about here.

 

You can overclock the Command Rate (CR) from 2T to 1T safely for a few moar FPS.
(tested on basic Kingston valueram 32gb).

 

Yop sorry....

MSI GT73VR 6RE with Intel 6820HK and 1070


Envoyé de mon iPhone en utilisant Tapatalk

 

@Phoenix

so what the new BIOS actually do? does it give you option in BIOS setting to optimize the color depth or it's something system controlled.

@Atma

Did you update to new BIOS...?

I think I'm getting more lazy and now relying on other's feed back.....

 

It does nothing.........

 

Anyone know why in my 6820HK, when I start ThrottleStop (but turn it off) my CPU frequency in Dragon Center and XTU is showing correct values ?

But, if I hit "Stop Monitoring" in ThrottleStop my CPU frequency (DC and XTU) is showing -2,7Ghz.

My only fix for the moment is to start (but turn off) ThrottleStop in task bar.




Envoyé de mon iPhone en utilisant Tapatalk

 

No, not sure I'm going to update if that is all it does.

 

Let all the others be your GP before you flash it Be smart as Papusan @Phoenix

 

This BIOS takes the Placebo effect to the next level, it makes you *think* that the colors are better

 

hey mate , i was from suffering the same problem for 4 month!!!
my problem was AVG antivirus!!
search and find yours. dont tell me that you are using AVG too!!!

if yes, go with another real antivirus like MAN

I selected ESET and i am happy

 

The BIOS changes the date to 2017 makes me feel my laptop more recent lol jk

 

There is no Need to update the bios for GT73VR 6RE.

I do it and i can't run my old oc values for my Memory.. now i can run only 2400Mhz before the update 2666Mhz was possible but only with the Standard Timings of the Kingston Impact sodimms.

but at the Moment i'm to lazy to go back to 10A.

cheers lads some glases Whiskey to the gents in this threat.

 

How did the Bios stop you from running the memory at 2666?
What happens when you try?

 

When Change it to 2666 bsod, bsod and bsod...
Memory Management is the issue.

 

I'm using Avast....


Envoyé de mon iPhone en utilisant Tapatalk