Clevo Driver Thread

could you please upload the drivers somewhere?
I am unable to access that link ... it won't load.

 

Here you go

 

Thank you but now I am a bit confused .
Can you give me ore details about what is what?
JMB38X_WinDrv_R1.00.63_WHQL (JMicron JMB38X Driver - Card Reader)
JMB38X_WinDrv_R1.00.23_WHQL (JMicron 1394 Filter Driver - FireWire)
JMC2xx_WinDrv_R0.0.30.8_WHQL (Network Card)

EDIT: got it

 

Realtek High Definition Audio R2.6x (6.0.1.6418)

[Win7 x64 & x86] DDL: http://station-drivers.com/telechar...ek_audio_6016418(www.station-drivers.com).exe

 

Did you check if your FireWire is JMicron or Texas Instrument?

 

The reason why I didn't post the firewire driver here is because to install the last update I tried it I had to manually force it since the inf did not have the right vendor id, the driver worked fine but not everyone likes being told to force install a driver, modding the inf would have just broken the signature resulting in the driver not loading at all while signature enforcement is active.

I see they have since corrected this and the last update installed fine for me normally, I'll add it to the list.

 

If remember correctly it's JMicron... anyway, the driver installed without issues.

 

Just saw that the download link on the first page that reads "JMicron Gigabit LAN Driver version 6.0.30.8" leads to the "JMicron Card Reader Driver version 1.00.63" file...

The correct version number is 0.0.30.8 and correct link is:

JMC2xx_WinDrv_R0.0.30.8_WHQL.zip

 

Download link is fixed, it was meant to point here but apparently my editor duped my link for the card reader driver.

The version of the driver package is 6.0.30.8/5.0.30.8, it actually contains two driver revs. 1 for each of different hardware types, the gigabit being the first one.

When you install the driver you will see the gigabit adapter listed in device manager as having driver version 6.0.30.8 which is the actual version number.


tl;dr: driver version is 6.0.30.8, not 0.0.30.8.

 

Thank everyone for your contribution, it's great thread.

Anyone knows what can you do with Intel Management Engine Interface Driver ?

 

This might be some helpful info for you: Architecture Guide: Intel® Active Management Technology

 

Realtek RTL8188CE Wireless LAN Driver version 1005.24.0712.2011

Found from Realtek

 

Thanks for that great link, i think i don't need it since im not administrating my computer remotly.

 

AMD Catalyst Application Profile - 11.7 CAP2

These are the Catalyst profiles for multi-GPU support.

DDL: http://www2.ati.com/Drivers/hotfix/catalyst_application_profiles/amd_catalyst_11.7_cap2.exe

 

AMD Catalyst Driver 11.8 (08Aug11)

DDL[Win7 x86 & x64]: [email protected] [ Mobility Mod By Asder00]

 

What? You mean you don't remotely reinstall the operating system to your machine while it's powered off?

AMT is some cool stuff.

 

what about THX TruStudio Pro ???

 

um...guys? just tried to download the current WLAN driver " Realtek RTL8188CE Wireless LAN Driver version 1005.24.0712.2011" from the link posted on the first page, but its asking me to input a username and pw? wt*?

 

Here you go:

REALTEK RTL8192CE/RTL8191CE/RTL8188CE Wireless LAN 802.11N (Drivers)

Download RTL8192ce_1005.23.0622.2011allos.exe from Mirrorcreator - Upload files to multiple file sharing sites

 

Fixed the link for RTL8188CE WLAN driver 1005.24.0712.2011.

 

AMD Catalyst Application Profiles 11.7 CAP3

DL: http://sites.amd.com/us/game/downloads/Pages/crossfirex-app-profiles.aspx

 

when i launch usb 3.0 Firmware Update 3.0.2.8.0.8, there's always an error message saying "not found the target device". Could anyone tell me why? (I'm currently running the stock np8150 w/ centrino advanced-n upgrade.)

 

Try the 2.1.19.1 driver. The same thing happened on my laptop when I used that version.

 

Aren't all drivers posted here:
CLEVO - Download

 

Only old drivers

 

ahh, yes, the 2.1.19.0 driver worked perfectly. thanks!

 

REALTEK High Definition Audio R2.6x (6.0.1.6423)

DDL: http://www.station-drivers.com/tele...o_6016423-vista7(www.station-drivers.com).exe

 

thanks but the driver is 6.01.642 3

 

Yeah, just saw that when I installed it. Thanks for pointing that out. I wasn't able to check the version since I was @ work when I posted it.

 

Hi
I am thinking of swapping the optical bay for a HD caddy. Will that work out of the box or any special driver is needed?
Mine is a P150 but not from Sager, it comes from MOUNTAIN - WorkStations, Servidores, PCs Sobremesa y Portátiles - ALTO RENDIMIENTO .
Any vendor you can suggest me in Europe/eBay?

What about Optimus? Is it possible to change its settings somewhere, I can t see anything in the bios ? My bios settings are very scarce.

tx
Simone

 

No, you don't need any special driver for an optical caddy. It's really just a super fancy SATA to SATA extension cable with an enclosure. Any 12.7mm SATA caddy will work, though you may have trouble getting the front bezel mounted on some. Seems to be luck of the draw if you aren't getting one from a reseller, but it's just aesthetic anyway.

What optimus settings were you looking for? There isn't much you can change with it other than on/off with the hard button.

 

These will work for a P170HM, correct?

Also, something seems...weird. This will be my first ATI card and there seems to be an enormous difference in driver file sizes.

ATI Catalyst Mobility package 11.7 = 1.1MB in size.
nVidia Verde 280.26 driver package = 183MB in size.

What the dealio? Are ATI driver packages less robust or just more streamlined and less bloated?

 

Select the latest drivers for your laptop. Check your Sager disk on what drivers .you need to install

 

The AMD driver thingy is just a downloader, run that and it'll download a bigger driver. =)

 

I'm getting 400 Bad Request when trying to use the search so I'll risk the question already answered pitfall.

Where can i get a working [YUAN MC907 Hybrid Analog/ATSC/DVB-T] - [PCI\VEN_1002&DEV_AC12&SUBSYS_000312AB&REV_00] driver for my X7200?

The Lenovo ones causes my Raid to intermittently crash on boot

 

AMD Catalyst 11.8 WHQL

Build info:
DriverVer=07/28/2011, 8.881.0.0000
8.881-110728a-122939C-ATI
Sign date: 12 August (Microsoft WHQL)

AMD Catalyst Mobility 11.8 Win 7 | Vista (64-bit)
AMD Catalyst Mobility 11.8 Win 7 | Vista (32-bit)

AMD Media Codec Mobility 11.8 Win 7 | Vista (32-bit & 64-bit)

AMD HydraVision Mobility 11.8 Win 7 | Vista (32-bit & 64-bit)

Use DriverSweeper to clean the old drivers.

 

Synaptics Touchpad 15.3.13

DDL: http://www.station-drivers.com/tele...touchpad_15.3.13(www.station-drivers.com).exe

 

Hi ladies/gents
I have a little issue id like some help with re the 6200N. basically i had this thing working but had to rebuild and now the Microsoft Virtual WiFi Miniport Adapter doesnt come up
I remember i used to have 2 of these adapters along with the 6200N and now none come up = no wireless
Any assistance would be appreciated

 

^ Uninstall the driver and install the proper driver for that hardware on the OP.

Realtek High Definition Audio 2.64

DL: Realtek HD Audio 2.64 Audio

 

Hi Patrck
I have done as advised, and tried about 5 different versions of the driver but still no go
Can someone that has the 6200N pls advise which version of the driver they are using to get it working
I have used the one off clevo.com.tw - no good
I have also tried 13.5 from intel.com - no go
The link in the Op desnt resolve anymore but goes to a drivers page on the intel site... pls any assistance would be greatly appreciated

PS could it be another intel driver having a knock on effect onto my wireless card?? ie chipset or something

 

This thread is great but can u add date's next to the links?
Because I've updated my drivers last week from the thread, but I think it will make it easier for everyone ?

 

You can look @ the post date. I usually post the driver update @ same day.

Are you installing them using Device Manager?

 

Added dates to the releases, will try to make them less eye straining to read when I have a free moment.

Same with my "last update" text at the top of the post, I also put what was added in the edit text so people know what was at the time of the edit.

I'd been against adding dates for a while because there were a few times where the dates were inconsistent between when the driver showed up, when the driver released and what version actually showed up when installed for a few of the drivers but it seems thats worked out now so I'll be adding dates where applicable from now on.

Also thank you to all who have contributed to this thread.

 

the way i have been trying is the install via the Setup.exe for the wireless suite. it runs the installation of the software + driver at the same time. should i uninstall and try the driver only via device manager?

 

You only need the driver btw, software is optional. But yeah, always install them using Device Manager first.


AMD Catalyst Application Profile - 11.8 CAP1

Rage3D DDL: http://www.rage3d.com/cap/profiles/AMD_Catalyst_11.8_CAP1.exe

 

The following drivers were updated, and need to be updated in this thread:

 

What do you mean? at the time being both of those are current.

 

Hello everybody,
I'm new to this forum and have a question regarding an unknown driver / device.
Once I go to computer management it shows an unknown device. After a little google search about the hardware ID I found out that its some kind of IR-device
I tried installing nvidias USB IR-Driver but without any result?
Does anybody have any ideas what this is or what driver I could try?

 

edit: sorry, double post.

 

what are your system's spec? Did it shipped with TV tuner? I distinctly remember that P150HM/1 and P170HM had a IR receiver somewhere on the front.