Clevo P870DM Drivers Mirror

Right on what about your desktop?

Sent from my LG-H901 using Tapatalk

 

FYI - I updated to GeForce v364.47 on my stock bios Clevo without any issues yesterday. (Standard update, not the Clean Install)

Played a couple rounds of SW: Battlefront and about an hour of World of Warcraft without any degradation. Everything was still running capped at 75FPS with G-Sync. Temps didn't move at all.

Seems like just an update for the most recent game releases. Not much else.


EDIT - UPDATE 3/9/16 - apparently Nvidia has PULLED the 364 drivers and are now listing the previous 362.00 drivers as the latest. I saw on a gaming forum that there were some issues with the 364 drivers and some GPU configurations.

http://www.theinquirer.net/inquirer/news/2450200/nvidia-geforce-36447-gpu-driver-is-borking-gamers-pcs

So, for the time being, I would stick to the 362.00 drivers. I just rolled back to them myself, just in case.

Thanks.

 

EDIT - UPDATE 3/9/16 - apparently Nvidia has PULLED the 364 drivers and are now listing the previous 362.00 drivers as the latest. I saw on a gaming forum that there were some issues with the 364 drivers and some GPU configurations.

http://www.theinquirer.net/inquirer/news/2450200/nvidia-geforce-36447-gpu-driver-is-borking-gamers-pcs

So, for the time being, I would stick to the 362.00 drivers. I just rolled back to them myself, just in case.

Thanks.

 

Nvidia have listed 364.51 beta in their download site now. It should fixed the Bsod problems.

 

Updated Intel Wireless-AC 8260 drivers to v18.40.0

 

@Phoenix, I have just received my EVOC P870DM-G from hidevolution and I started downloading all the drivers you kindly provided. However the link to Intel Management Engine Driver V11.0.0.1202 is broken. I am unable to find it anywhere, could you please upload it, if you have a copy.

Thanks!

 

Wow!! you have an EVOC?? congratulations! I wish I had one please post your specs and update your signature with your system specs.

Regarding the Intel Management Engine Interface, your wish is my command, here you go:

Intel Management Engine Interface Driver v11.0.0.1202

 

Thanks! I'll create a signature. Although, I didn't have the money for the delidded 6700k. So I guess it's not a "true" EVOC.

Sent from my Nexus 6P using Tapatalk

 

I didn't as well. I did it after 3 months of being tired with the stock 6700K I had which doesn't overclock past 4.2 GHz on all cores.

I wish you good luck though, a user here called bloodhawk ordered his laptop from HIDevolution and got a very good overclocking processor that reaches 4.7 GHz and that's without delidding.

I regret buying a Eurocom one to be honest. Next system I wanna buy an EVOC like you maybe when they have a new GPU I will. The 980 GTX (desktop class) is very good though but I always wanna have the latest. Even if 90% of what I do is surf the web and watch YouTube.

 

by the way, did you tell them that you are an NBR member to get a discount? I really would like you to have a delidded CPU and Liquid Ultra

 

Yes I got the discount and I got liquid ultra, so that's something at least. Hopefully I got lucky with the CPU! I haven't started testing yet. No time...

To be honest I would be happy with an overclock of 4.4 to 4.5. I remember reading that higher overclocks made gaming unstable, has that been your experience? I also do a lot of satellite data processing, for long periods of time, so stability is key.

I'll let you guys push your machines to the max , I need mine for work, so I'm not so adventurous.

Sent from my Nexus 6P using Tapatalk

 

If you want, I will help you configure your system over Skype via a on-on-one session and get you started. Then we will test for temps to see if we can get you a moderate yet stable overclock.

Let me know if you are interested so I'll shoot you a PM.

 

Thanks for the offer. I'll have a bit of tinker first, if I'm having any problems I'll message you, but I have to say your guides are probably more than enough!

Sent from my Nexus 6P using Tapatalk

 

Intel Management Engine Driver updated to v11.0.2.1000 in the OP

 

New driver updates in OP:

- Intel Chipset Software v10.1.2.10
- Intel AC8260 Bluetooth Driver v18.1.1605.3087
- RAID Driver v14.8.4.1046

 

@Phoenix is Hotkey driver in first page still versjon 32?

 

Yes

 

Not sure if you guys also had this issues, but all the version .35 downloads for the hotkey driver are corrupted.

 

It's been corrupted since it was released. They don't care to fix it, that's why we're still on vx.32

I can get the .35 version off Sager's website but that is marked for Windows 7 and I want to ensure 100% compatibility so I'm not adding that

 

Updated nVIDIA GeForce Driver to v364.72 in OP

 

A massive thank you for doing this and keeping it so well maintained!
One slight suggestion. Would it be possible to add the date you updated the driver on the main page? It would make keeping track just that little bit easier if you're already updating the post with new links.
(+ Rep btw)

 

Thank you, keeping track is very simple, when you download them, name them according to the version number. Then when you check here regularly, compare the version number to yours.

Additionally, upon every driver update, I make a separate post in the end of this thread so it is very easy to know if there was a recent change.

 

I apologize for not skimming through the recent posts, but I did see in the updated first post, you have 364.72 listed. In the Batman 2.0 thread, we're having multiple reports of this driver (and 364.51?) removing g-sync capability. Not sure if you guys have the same issue.

Ways to confirm loss of G-sync: If your FPS in game is higher than your panel refresh rate, and/or if g-sync settings are entirely missing from nvidia control panel

 

I am using this driver. Just run Heaven benchmark, notice the FPS being capped @ 75 FPS which is my screen's refresh rate so I think GSYNC is working fine.

 

What system bios are you using? Stock sager?

 

Sager? I have a Eurocom Sky X9E nothing to do with Sager.

My BIOS base version is v1.05.03 / Prema BIOS v1.5

 

Yeah that's probably why yours works. Premas bios seems to have no issue. Stock bios seems to lose g-sync

 

@Phoenix why is the "Control Center AP v5.0000.0. 32 (AKA Hotkey Driver)" listed on the first page and not the v5.0000.0. 35 ?

Did the .35 version had issues?

Thank you

 

.35 packages are corrupted for the Window 10/8.1.
I think only the Window 7 ones are ok. The give you a corrupt archive error when you try to extract.

 

This issue is entirely confined to the P75XDM-G models. No 17" models have been affected.

 

interesting thanks

 

Thank you for the feedback !
Then it's strange because I have the archive for windows 10, extracted it without errors and I am running it... for some time now...
I asked because given the issues that I have with he synaptics driver (bluescreens) most Clevo P650 owners blamed the Clevo control center... or the bad compatibility between the CCC and the synaptics... and I started to investigate a bit, and wanted to have the latest drivers...

 

Please erase it.... double post... my bad... Sorry about the mess

 

can you download it now and see? It cannot be corrupted for one person and works for another. Are you downloading it from here:

http://www.clevo.com/en/e-services/download/ftpOut.asp?Lmodel=P870DM&ltype=9&submit=+GO+

 

Man this is strange...
I downloaded the archive from US and Asia servers and it's corrupted (used the link you gave me)
I am @ work right now so I can't give you the details, can't check the CCC archive that I have at home with the .35 version but I am wondering how did I manage to unpack it and install it without errors...
I'll write back when I get home...

 

That's what surprised me too. Unless you accidentally downloaded the Windows 7 x.35 version from Sager's site thinking it's the one for windows 10

What's really disturbing is this file has been corrupted for 2 months now. I think it's time that Clevo Driver Clowns fixed it.

 

@edit @bloodhawk

The x.35 driver is not fully corrupted, only some files are so the way I got it to work is.

1) download the x.35 version from the Windows 7 Downloads from Sager's site

2) Extract them to a folder

3) Download the corrupted x.35 driver and extract it to a folder

4) cut/paste all the files from the corrupted x.35 windows 10 driver to the Windows 7 driver overwriting whatever files are there

It works, but I still don't like forcing things this way.

 

One of the main files " data2.cab is corrupted. For all we know that has all the files with the changes etc etc.

 

Intel AC8260 Bluetooth Driver updated to v18.6.1

 

Intel Management Engine Driver updated to v11.0.10.1002

 

@Prema

This new ME version v11.0.4.1186 is not for this laptop is it? it says for NUC? I don't know if I should update to this or leave it at v11.0.2.1002

 

NUC versions are not for the laptop... It's for some Intel system kit they sell..

 

@Mr. Fox @Papusan

IRST Driver updated to v14.10.0.1016 in the OP

Results after testing, I got a 1 MB/S increase in the 4K Read and a few higher points in other parameters

 

Thanks. I will also test it on my AW17 ''Elitist'' the last of the good 17 inches model from DELLIENWARE. I'm still on the glorified IRST driver 12.8.0.1016 on that machine. None of the newer drivers are better for my AW I think.

 

Realtek S5250 Card Reader Driver updated to v10.0.370.125 in the OP

 

Quick question, the stock vBIOS will work for any MXM Desktop GTX980 G-Sync or every card needs a specific one?

 

there is a GSYNC and non GSYNC BIOS

you need to flash the correct one

Same goes for Prema BIOS from partner shops, there is a G-SYNC and non G-SYNC BIOS

This also applies to the VBIOS by the way

 

Yeah i was talking about the vBIOS, forgot the 'v'.

 

The same rule still applies brah

 

Figured it out good sir.
Dhanyawad.