Sim sou. Yes I am but I won't help. Sorry
Enviado do meu ASUS_I001DC através do Tapatalk
-
Oh bro ajuda me tinha, visto aqui no forum acho que foi com a, tua situacao e a dizerem que a bios era do lado esquerdo dizia winbond 25Q80 e agora esta me a dizer que e mesmo ao lado do teclado.
Ja fiz merda de certeza=( -
Only english since this is a English forum.
The only BIOS chip to flash is the one I showed I the imgur album. Not any other one. Only that one
Enviado do meu ASUS_I001DC através do Tapatalk -
Okok hoe, i reduce the size of bin file?
-
no you don't . You need to wait until someone helps you. Don't go around trying to reduce the filesize... That isn't possible but i don't know how to force flash the BIOS.
just wait until someone reads this and can help you. -
Ok bro but u cannot provide me ur bios?
I receive the error when checking 0HLast edited by a moderator: Nov 2, 2020 -
I got the same one as OP (Open Post)
-
Use the edit button and avoid spamming the thread with a single phrase
I got this one: 1.07.24 from @dsanke BTW
https://mega.nz/file/Dcx1Fa4Y#U03gezV2HaKnzH28qvW8k21CbY2GAQ1vq8WvDXdx_so
P7xxDMx_RTX.rom <- -
Yes, this is the chip! I also have the TL866II, which works very well. It can also work in ICSP mode. That is also important, it worked better for me. Anyway, you need a programmer like the TL866II Plus.joluke likes this.
-
had u tried to keep the new bois of the 8th/9th gen but in stead use the windows default sound because updating the bios cause some problems with sound, backlight keyboard and in some cases G-sync with i7/i5 8 and 9xxxF cpus !!!
-
Yes, this one works.
-
Flash check error address 10h
Someone knows this, error? -
That is either a contact problem or the kind of programming does not go with the CHIP!
-
Hi bro u have 9 generation on ur p775dm3-G -
That BIOS is for 8th gen and 9...
-
1. Release for 8/9 Generation
2. Realese for 6/7/8/9 Generation
Summary: two main releasesjoluke likes this. -
He was asking about the one I have flashed.
-
No worries. If you follow the conversation you can understand what he is asking for. Don't worry
-
Ok mate
I recovery my bios.
When i testing bios 8th/9th modded
I havent sound and lost g-syc
Happen the same with u bro? -
Ok bro what, program u use to control ur fan before i had obsidian bios and now have other.
Obsidian is very good but i lost that bios =( -
How u have obsidian software?
-
Bought it? https://code.obsidian-pc.com/clevo-software/
Etzubasa likes this. -
Yes kkk.
Bro can u give ur number or something because i have a friend he have a 8700 for me.
And u already do it..
Can u help me do the same with my laptop pls
I have a buyer to my 6700K too
I just afraid because no one knows about this too much -
You really need to delete all of Obsidian's additional software first. But we come back to the beginning. If the laptop doesn't turn on, you can only flash with the TL866II Plus or others. When flashing with SPI, it is important to plug in the power cable and switch to ICSP programming. If your laptop is still on, you do not need the SPI device. The sound will probably not work because of your Obsidian software.
Repeat your current status again:
1. does the laptop turn on or not?joluke likes this. -
I have lapton with original bios now with 6700k but when no sound i formating and test the bios with 6700k
bro what graphic u have?
can u say to me what bios i download to my clevo with 8700 with gtx 1070 -
The first page?
-
Post #1 in the thread... http://forum.notebookreview.com/thr...kylake-kabylake-clevo-lga1151-laptops.821694/ All threads start with post 1
-
Yea bro but i will install the bios p7xxdmx or p7xxdm_10?
I do it!!
=)
But lost gsyc =( =( =(Last edited by a moderator: Nov 9, 2020joluke likes this. -
I did flash the RTX one from a few posts above and gsync works
Use the one from this post:
https://mega.nz/file/aUZVVYJD#6l1mQt3awUn2eTe5ASfyWWzQeXhSojApMpuNknS6WVA
It was modified by @dsanke with a P775DM3 fixed name for cpu-z, hwinfo and other apps from this post of his:
http://forum.notebookreview.com/thr...s-now-supported.825558/page-199#post-11055936
This one has usb type c ports working and the correct model name for our laptop!Last edited: Nov 8, 2020Etzubasa likes this. -
Where is that bios bro?
And have cpu 8x ratio lockLast edited by a moderator: Nov 9, 2020 -
Edited the post above yours with the correct mega.nz link for the BIOS with usb type c ports working and a correct model name for our laptop
Like i said, EDIT your posts and stop posting every single question in a different line! It isn't that hard to do -
The steps are the same with meset and others?
-
Yes but the file is rom in that bios u say to me not bin and he talk about to write bios. Bin
-
change the file name from .rom to .bin and call it "bios.bin"
The name doesn't matter, as long as you type it in fpt. It will flash it anyway
Etzubasa likes this. -
Hello. Does anyone know if the Pentium Gold G5600F requires pin isolation or not ??
-
Since it is a coffee lake cpu it should require. Use kapton tape to do itEtzubasa likes this.
-
Finally I checked. Pentium G5600F works without pin mod on MS16L1
joluke likes this. -
I am asking because of this comment, i hope you will understand my concern.
Thanks in advance! -
moral hazard Notebook Nobel Laureate
Which laptop do you have?
For example, my p870dmg doesn't use the igpu for anything and I believe the mxm port is directly wired to the LCD. Correct me if I'm wrong. -
The IGPU doesn't have physical power lanes connected to it. It's like the IGPU doesn't exist.Last edited: Jan 2, 2021
-
P750dmg 9400f, i wrote accidentally wrong thread.
-
Hi everyone, does anyone know if an update for the bios modified by dsanke has come out?
Last edited: Apr 2, 2021
Official Coffee Lake Thread/BIOS For ALL SkyLake/KabyLake Clevo LGA1151 laptops
Discussion in 'Sager and Clevo' started by DaMafiaGamer, Jul 31, 2018.