So HWInfo now supports fan control for Clevo's?
That would be pretty awesome, if we can set custom fan curves.
I can check right, dont have the system with me.
-
-
-
Last edited: Apr 9, 2016
-
This would be really cool, the secondary gpu on my sli setup runs about 10c hotter. I wish i could crank up the fan speed on the secondary gpu or have a more aggressive fan profile for it.Papusan likes this. -
Had a little fun at work
CPU @ 4.5Ghz
GPU @ +240/+400/+25mV
http://www.3dmark.com/3dm/11582770?
Prema, Cass-Olé, Spartan@HIDevolution and 3 others like this. -
At 4k i cant OC beyond +150/+100 at stock voltage and +175/+125 @ +.25v -
GPU was in the mid 60s max
Ambient temp is around 23C (74F) [I'm at work so I can't use any assisted cooling, only fan speed @ 100%]
I will push beyond +300 when I can get this thing COLD.
I love the GTX 980 card. Way more fun than the 980M's for overclocking.Prema, Spartan@HIDevolution and hmscott like this. -
-
Even better temps this time around, TS Bench and 3DMark FS ran.
The GPU is cooled by two fans while the CPU is cooled by one fan. Also my CPU is not delided yet...
-
Dang. That is one impressive card. Is the environment Air conditioned?
Im sorry if i came across offensive, didnt mean it that way.
I have tried FireStrike on 3 P870DM's with the 4K screen and all of them idle at about 35-40C and max out at 80-85C under load., without overclocks .
The CPU is also darn good for a non - delidded one.
Are you still rocking the stock ICD ? or did you re-paste it again yourself? -
Stock ICD on the CPU as far as I know. Stock ICD on the GPU as well. -
Should have bought a few powerball tickets haha.
Im Bay the Area here on the East Coast. I have a feeling there is something seriously wrong with my thermal paste job. Or there is a too much gap etc etc.ssj92 likes this. -
Spartan@HIDevolution Company Representative
Prema likes this. -
Spartan@HIDevolution Company Representative
-
Sent from my LG-H901 using TapatalkPapusan, hmscott and Spartan@HIDevolution like this. -
Spartan@HIDevolution Company Representative
My previous desktop 5930K destroys my current CPU in wPRIME @ 4.4 GHz
6700K @ 4.4 GHz:
5930K @ 4.4 GHz:
hmscott likes this. -
That CPU will not fit in our laptops, it's for the HEDT platform.
It will fit in my desktop though.TomJGX, Papusan, hmscott and 1 other person like this. -
They are killing me with the reverse naming though....
5960
6950TomJGX, ssj92 and Spartan@HIDevolution like this. -
. I think there are a couple of people in the forum who would cheered loudly if Clevo had created a new monster
.
Spartan@HIDevolution and hmscott like this. -
So if nothing good comes out to replace the 6700k by the time Pascal releases... I may just may get a 4.9ghz from silicone lottery. I want to do more research on their reputation but it definitely interests me. Then if all goes well with my research... I'll get sli Pascal with a 4.9ghz delid CPU
-
Pascal will be nice but I am afraid we are in for something unexpected. In other words I expect Nvidia to pull some trick out of their money bag.
Sent from my LG-H901 using TapatalkTomJGX, Prema, Firebat246 and 2 others like this. -
Prema, Spartan@HIDevolution, hmscott and 1 other person like this.
-
Sent from my LG-H901 using TapatalkLast edited: Apr 9, 2016temp1147462323, Mr. Fox, Papusan and 1 other person like this. -
GTVEVO likes this.
-
.
-
So the Clevo Control Center has completely ****ed my system over. I figured i will it another shot, looking at the results others were having and that their OC and Automatic profiles were working just fine. I just installed it (v 0.32) and now my GPU fans wont turn on unless the fan profile is at the maximum.
I have tried reinstalling it 3 times now, and the GPU fans still dont turn on no matter how hot the GPU gets, unless i turn them on using Fn+1.
I figured they will turn on when it get under load, ran Unigen Valley, temps instantly reach 80-90C and still NO FANS.
Right now im idling at 80C on the automatic profile and still the FANS are at 0 RPM in Hwinfo. Cant even feel them running when i put my hands next to the grills.
Any idea how to fix this? And no reinstalling Windows is not an option, i have too many applications and installing everything will take at least 2 days. -
Last edited: Apr 9, 2016ssj92, GTVEVO, Mr. Fox and 1 other person like this.
-
GTVEVO likes this.
-
GTVEVO likes this.
-
-
-
Do you have the option for custom fan controls enabled in the @Prema BIOS? Might not hurt to double-check to be sure. -
I think you're right. I just asked my friend who owns p870 with gtx980 and his also behaves like yours. -
But yeah, custom fan control was enabled. Now my fans behave normal at the automatic/maximum modes.
Its stupid how the Control center manages to **** it up instead of actually making things work. OC/Automatic/Custom literally did not do anything and turned both fans to 0 rpm.Last edited: Apr 9, 2016temp00876, CaerCadarn, Papusan and 5 others like this. -
Spartan@HIDevolution Company Representative
-
-
Last edited: Apr 10, 2016bloodhawk likes this.
-
Spartan@HIDevolution Company Representative
-
Cass-Olé likes this.
-
Well guys looks like I'm at a loss. I recieved confirmation from Prema that I have the latest BIOS so no explanation about my throttling. I am stuck below 1.32v.
-
More fun at work. I really should be doing my homework during downtime, but this is more fun.
4.6Ghz wPrime
Cass-Olé, Spartan@HIDevolution, Papusan and 1 other person like this. -
Spartan@HIDevolution and Papusan like this.
-
-
Spartan@HIDevolution Company Representative
-
I just realized I still need to order liquid ultra so I can delid this cpu.
Spartan@HIDevolution and Papusan like this. -
Or have you break your Raid?
-
Spartan@HIDevolution Company Representative
CrystalDiskMark / AS SSD Benchmarks on single drive setup coming soonPapusan likes this. -
-
btw. will it be possible to share your Throttlestop settings? I haven't used it before so dont want to mess with it without knowing. -
Spartan@HIDevolution Company Representative
@Papusan @bloodhawk @Mr. Fox @johnksss @ssj92 @GTVEVO @tilleroftheearth
I am the leader of the SSD Single Driver Benchmarks for now as noone has submitted their scores. The most important stat here IMHO is the 4K Random Read / Write and latency. That's where most of the snappiness feeling comes from
No IRST Driver installed, only the latest Samsung NVMe Driver v1.1
Clevo Overclocker's Lounge
Discussion in 'Sager/Clevo Reviews & Owners' Lounges' started by Spartan@HIDevolution, Mar 4, 2016.