Clevo Overclocker's Lounge

I'm going to have to get one of those. Been wanting one for a long time and always forget about it when I have a few extra bucks available. I need one in my dust magnet office really bad. Would certainly be much better than going back and forth to the garage to fill my refillable canister with the air compressor 3 or 4 times. That works, but the capacity is very low. It's nice using it filled with alcohol for cleaning, but it only has about 8 to 10 seconds of compressed air blowing time.

Yeah, you're probably right. I bet it would work well for that purpose. Certainly appears to be geared toward that.

 

Milk more money!!
Microsoft removes ReFS file system create option from Windows 10 Pro - Ghacks.net

"Did Microsoft do that to entice companies to pick the -- probably more expensive -- Windows 10 Pro for Workstations edition?"

 

Let me know your thoughts on it in a few hours.

 

im using server 2012 lol. migration is a pain in the butt and i cant seem to get bluetooth to work, might be the end of the line for me and start trying different wificard or dongles. i already gave up on clevo hotkeys they just wont run on server windows, im dual booting so it worked in windows 8 but the lighting profile not sticking. each time i restart my system it reverts to rainbow color rather than the all white keyboard, no lit back lid profile i've set.

@Johnksss have you tried the CCC getting backlit to stick?

 

The @Prema BIOS/EC mod should have the keyboard and lid all white LED with no breathing pattern on the lid. Maybe he hasn't done that part yet.

 

Yes, but I delete the first profile and that automatically give me all white. After a warm start, it will keep your settings, but after a cold start the EC is first and then once in windows your colors take over.

Not done yet on the TM1


@ole!!!

You just need to get the driver hardware id and then go from there. It might be like a lenovo or dell or something that uses the same driver as 2012 server....Just have to keep doing trial and error.

 

for the backlit, because server 2012 can't get the software to run maybe thats why once a cold start it stayed with it's default color i donno have to do more testing and delete profile 1 like you mentioned.

for the driver, once i got hardware ID which i do have, do i proceed to mod the inf?

 

deleted

 

This doesn't belong here buddy! Reply is in the beta group.
Only use BIOS to change the settings, not XTU or TS, then it works.

 

k thanks, my mistake, removed

 

No, you proceed to find the correct version of the driver needed. Thought this was for the bluetooth not working?

 

Prema, apologies for asking here, I'm unable to message you directly!

Could you kindly provide a copy, or link, of your Clevo W350ST/STQ BIOS file to me please? [email protected].

Thanks.

Trash.

 

https://world.taobao.com/item/528507840070.htm

4980HQ LGA conversion using PGA interposer board

 

Ha! I just noticed the Santa hat on the Phoenix. Nice!

 

thats a cool idea and certainly would work making it replaceable however there are still major concern with this.

1. low quality remains
2. this isnt intended for OEM so heatsink will need modding unless the extra height for board is like 2mm and wont affect cooling.
3. BGA chip purchase is probably a lot harder to find than LGA.

whoever did that, definitely give them the credit for doing that work cause intel suck, though maybe wasted effort. they need to do that for HK cpu!

LOL nice

 

Mixed bag. Need proper firmware.
Eurocom Sky X9C (i7-8700K, GTX 1080 SLI, Clevo P870TM1-G) Laptop Review

 

i posted my 2 cent but looks like that crappy forum wont allow new users to post screenshot or any links related in the comment, even if the links are imgur etc.

24/7 4.9ghz clock this also includes avx/avx2 workload. 5ghz with avx simply too hot to my liking over 83C!!. gotta stay under 80C whenever possible. now not gonna cherry pick, the fan is maxed at 80% in the screenshot below cause CCC sucks, if i let fan go on auto it will hit 80/81C when gaming, but sooo quiet.

 

"From mentioned review.... "Furthermore, the real-time readings from the AC adapter do not appear to be very accurate and they would often underestimate actual results. When running Witcher 3, for example, our independent readings with Metrahit are steady at about 458 W while the adapter would occasionally record 326 W with jumps to the 400+ W range. We're unsure what is going on here, but we suggest that users double-check with their own independent instruments if accurate power consumption is of concern."

@Mr. Fox @Johnksss Have you seen similar when you tested up against your UPS? A Kill-A-Watt is more accurate than this.

 

Are the readings based on the output on the display rather than the draw from the wall?

 

Been here. Done this. Reported this. Argued this. And so on and so on...

 

Onboard readings even on high end desktop digital supplies are not usually very accurate.

 

Not me who tested (and I don't have the 780w psu). But all can see 326 W with 2x 175w graphics + Cpu and the rest need a lot more than this. I don't know what is NBC's test procedure. But they can't be totally stupid.

Maybe they use something like this. Who know

 

They don't do display refresh rate delay measuring right so I don't tend to give them too much credit with such things.

 

I can't see how much they can screw up this The wattage jump up and down as they say for the 780W display. And their own measure monitoring show about constant watt. 326w shouldn't be showed at all. 326w is more like a Turd on steroids

 

Apple should stick to their phones, Ipads + their app store. May I smell similar coming from Microsoft in 2018, 2019 or 2020? I feel sick and really need to run to the toilet

 

Really doesn't matter since they didn't ask any of us to confirm.

 

Interesting read regarding a system made in 1977 having less latency than one made 40 years later in 2017:

https://danluu.com/input-lag/

 

CRTs FTW

Edit: brb getting an iPad Pro so I can become a pro FPS player

 

@Papusan did you see this?

No Prema bios= Throttlebook.

That's why you buy an Evoc system from HIDevolution.

 

read this earlier today. Found it funny, but considering latency and lag is coming front and center on everything, I welcome it!

 

Almost 2018, time is moving fast. Wishing everyone a happy new years eve and a blessed 2018!

Just leaving this here:

Spoiler

 

Annnnndd now I have to wait to purchase my P870TM for Volta updated cards... *Sigh*

*Edit* Isn't GV100-400-A1 the same die as the Titan V?!

 

I need one of those for the DM-G!

 

GV100-400-A1 is a desktop chip label. NVIDIA uses a different naming system that start with Nxx for laptops.....

Shouldnt this be N18 something?

In fact, if you look at this video,

The thermal paste lay out is the exact same as the die shown on that picture. What a coincidence?

Funny enough, the die is produced in the same week, 34th of 2017 as that TITAN V, with the same serials. How interesting....
Hmm, are you kidding with us @Prema ?


Edit: Also, a very similar VRM design as the TITAN V which is a massive overkill even for a desktop card that cost very valuable PCB real estate on mobile?

The mounting screws seems to be too close to the die?

 

And I forgot, most importantly, Happy New Year everyone!

 

Yeah, I've waited a good while for something similar like this. I'm ready for this And Happy New Year to you all.

 

It's amazing how 'little' it takes to bring the life back into this thread in no time.

Yeah, NVIDIA even prevented Clevo from putting a 1080TI core on an MXM board, so I wouldn't wait for a Titan V either.

Courtesy of our good friend @SFVogt

 

Um...this this is photoshopped...
As soon as someone mentioned the thermal compound and I looked at the video...
And the imprint of the BGA housing looks ....out of place

 

I'm waiting for the WCCFTech article

 

I already don't want that card. Bring on the other ones.

 

Spoiler

 

Photoshopped or not... I'm ready New cards will come to Papa, be you sure

 

Okay, you got me. I'm trying to rack my brain what he ( Andre Marie Ampere) has to do with this.

 

Rumor mill says consumer Volta is "Ampere", and that Volta will be for Teslas/Quadros/etc only and consumer cards will have everything else cut except for gaming and like NVENC

 

Its the gaming arch. Volta is the compute architecture.

 

In other words, the neutered Volta coming to a card near you!

 

Thanks guys!

Side note:

Even if it wasn't photoshopped or not...I still was not going for the NO SLI connector.

 

@Johnksss
I bought that electric duster you mentioned 1 day shipping. It should arrive today. I hope you did not steer me wrong. That thing cost $75.

 

But the VGA was more convincing without SLi connection. Because even the Desktop Titan V does not support SLi.

Happy New Year to all