*** Official Clevo P65xRS(-G), P65xRP6(-G) / Sager NP8153(-S), NP8152(-S) Owner's Lounge ***

I have a question again, upon opening my laptop for a repaste job i found out that the previous owner had REMOVED ALL the thermal pads! ( why the f.... )
i ordered 3 sheets ( 1.5mm 1.0mm. 0.5mm ) and got to work..

However, whatever i do, i end up either with a not properly seating heatsink, or pads not touching..
Is there anyone that can tell with confidence what size(s) ( are there multiple sizes in use at the same time ) are needed for my p650RSG

I saw a topic regarding a repaste job
http://forum.notebookreview.com/thr...3-owners-lounge.795990/page-121#post-10556642

But the dude/dudette in that topic is using different thicknesses pads even just for the Vram... that can not be good?

And therefore i do not trust his measurements on his "before" photo..

His pictures:

Before:


and after ( look at the thermal pad thicknesses of the vram.. the Vram ( BLUE PADS ) is all the same size but he is using different thicknesses pads )



and my board, numbered for your convenience
if you know the thicknesses please write them down for me corresponding to their numbers.

 

Registered an account on techinferno site ( where baked is hosted ) but you need some sort of premium membership to download files..

 

could you please provide me with a working download other than that techinferno site?

@Timbabs123

 

Ok will do once I get back in

Sent from my SM-G935F using Tapatalk

 

You rock!

Just to be clear; i'd like that "baked" bios for my p650RSG ( same as yours right? )

Thanks a bunch man!


You still using that bios? If not, which one do you think is best and where to get it.

 

Yh am still using but plan to go back to stock soon and here you go:

Baked bios for Clevo P650RS-G: https://www.techinferno.com/index.php?/files/file/108-p650rsrp-mod-and-stock/

Look at 1st post of link thread for flashing instructions. And please note you flash at your own risk and only flash if you have said above model. I am not liable to any brick caused by flashing

Sent from my SM-G935F using Tapatalk

 

You wouldnt happen to be able to download that file for me and put it on Google drive or mail to me or anything? Techinferno wont let me download.. could take a week for my account to be validated

That's why i said "any other link than techinferno" in my previous post

I wont sue your balls of.. Pinky promise

 

Link taking down due to forum rules sorry

 

Thanks! got it!

Do you happen to know if that bios has a built in EC or do i have to download/flash that seperately

 

It has a built in EC

 

You're a great help! thanks

 

Almost scared to ask @Timbabs123
But, could you copy paste that info for me ( seeing i have no acces to that site. And if flashing instructions are different to standard instructions i don't wanna mess up )

 

And you think this is OK? I'm sure most forum members and the moderators on T|I don't like it.

 

I honestly dont know but I could just take it down now

Is it allowed?

 

just check the first post it says it there and that is accessible by everyone

 

None should share other people's hard work!! It's a reason forums make and have rules, and you as all other should follow them.

 

Alright mate sorry didnt know about that I will take it down now

 

Yeah, do that

 

I did not mean to get anyone in trouble.

But as far as i know the people at techinferno stole prema's work.. so no hard work there.. well.. maybe hard work..but still pirate work.. so unless you want to be the devils advocate

 

If everyone always obeyed the rules it would be a boring world..

But hey.. "rules are rules"

 

Yeah, you can put it this way It's assholes everywhere! But I hope all understood my point with my reply. Sharing without following the rules ain't nice!! Same as stealing!!

 

If i understood your point? It depends..

If you have;
No pirated software on your pc
Never downloaded a movie
Never downloaded an MP3
Never pirated a game
Etc etc

Yeah, then i understood your point just clear

Or else it's just hypocrite, don't you think?

 

I think going smoothly through this list But I can not remember everything what I did in the old days(I'm 52 ), but I think I'm pretty clean I prefer paying for things I want. The way it should be

 

I'm Just a spring chicken. 32

We all sin.

Forgive and forget.


Much love from Holland

 

I believe there is a moral difference between downloading an episode of a TV show and taking the work of an individual working in a small community and releasing it as your own.

 

Another question;

I have 2 accounts on this laptop ( windows 10 ) and somehow the Clevo control center ( and accompanying programs like the gpu toggle, flexikey etc. only show up at the account that was logged in first.. so if my girlfriend starts up the computer she has them, and when i switch to my account i dont have them ( even when se logs out first )

i have to reboot the laptop and login to my account first to have acces to the clevo control center..
other way round same thing..

The funny thing is, when i have logged on first ( and have the clevo control center ) and she then switches to her account and presses the hotkey for the backlight, nothing happens..
BUT, when i switch back to my account, that keypress did register and the control center is open on my desktop.

what can i do so we both have acces to the clevo control center?

 

The program will be using firmware hooks that require locks on files.

 

In noob language that means?

Not possible, possible?

 

Basically having two things trying to talk to the same bit of firmware at once = bad.

 

I got it to work so that when one person logs of and the other person logs on it works.
Made a macro that shuts down the services on logoff and starts the services on logon.. clever ey?

 

My dad always says "your're not as dumb as you look"

 

That's the best way to do it really if you need multiple users on it who want lighting control etc.

 

I know that when i am in MShybrid mode some settings do not show under the nvidia control panel.

but, i would like to change some settings for games and applications that i set to use the nvidia card.. however, it does not let me do that?

example, in hybrid mode; under 3d settings; v-sync: there are the options "on, off and 3d setting enabled"

in discrete mode ( GPU mode ) there is also "adaptive" and "fast"

let's say i have BeamNG installed and set the settings so it uses the dedicated card ( should be the same as discrete then? ) even then i do not see "fast" and "adaptive" under v-sync settings..

how do i get it to work so that i have al GPU enabled options when i tell a program to enable the GPU?

 

You need to go into the Intel control panel as the Intel chip is driving the display. The options that are missing in hybrid are irrelevant which is why they are missing.

 

sounds fair enough!

 

It's the trade off and part of the reason the switching is included.

 

So... Update on this: http://forum.notebookreview.com/thr...s-owners-lounge.795090/page-469#post-10414573
Once home the laptop never booted with display. It did boot but no display at all. I ended up returning it (from The Netherlands to Norway) Let me just say sending a package there can be a pain...

Long story short: I've got it back from RMA now and it boots with display again. The shop says they updated the BIOS, the CMOS battery, redid cooling paste and cleaned it.
I expected the 1060 to have died (it was on discrete mode) but it looks like they didn't replace the motherboard.
Now I am worried it is still a faulty machine, I am scared to put it in discrete mode again because I fear it might go without display again.

Is there a BIOS changelog and/or somewhere I can check the version.
I want to know if this is/was a known issue (thread is kinda long to search for it).
Am I safe now?

 

I would check right away, if it has to go back then it has to go back.

 

So it does boot in Discrete and I can switch on G-Sync, ran Heaven benchmark and it is working.
But my faith in this machine is gone, every boot I fear it will not give me display.
Is there a changelog on the BIOS or something? Online I cannot even find a BIOS download, the current version is .09

 

Talk to your reseller for more details on what was done.

 

What is the latest bios for 65XRS?

 

What is the latest bios for 65XRS?

 

What issue are you having?

 

Hi guys I updated bios to the newest sager which was posted here and next I installed baked bios. I see that my fans dont work properly in games. Before install baked bios I used included backupwin and I have file BACKUP.ROM how now restore bios ? or can I install my old bios from https://mysn.de/driver/1_XMG/XMG_P507_P707/BIOS/ without brick?

 

You would need to confirm with the creator of the mod that a step back is possible.

 

New XMG Bios is out, anyone using it allready? txt refers "Microcode" WTH is that?

https://www.mysn.de/driver/1_XMG/XMG_P507_P707/BIOS/

 

Anyone tried the bios

Is there any notable difference?

and is the throttling problem for the 6820HK and 7820HK fixed?

 

Microcode updates can fix errata in the CPU.

 

A couple weeks ago I started having some glitching when waking up from sleep when connected to external monitors with my P650RS. I tried reinstalling Windows a few times, and different driver versions, but things just seem to get worse each time. Now my laptop chain BSODs (TDR errors from nvlddmkm.sys) three times each time it wakes up from sleep or hibernate and I'm not sure what to make of it. Anyone got any ideas?

Also, when connecting a 100Hz monitor, it says its refresh rate is 100Hz, but it is actually 60Hz unless I set it as the primary display.

 

Hi guys, is it safe to flash a stock Clevo BIOS on a branded (eg PC Specialist) laptop that has an already branded BIOS?