The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Latitude E6400 Owner's Lounge

Discussion in 'Dell Latitude, Vostro, and Precision' started by Greg, Aug 30, 2008.

Thread Status:
Not open for further replies.
  1. khoifl

    khoifl Notebook Enthusiast

    Reputations:
    0
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    5
    Well, I just want to know if anyone already found out about it. Do you happen to know I can take the bezel off without taking off the whole display assembly per dell instruction?
     
  2. HerrKaputt

    HerrKaputt Elite Notebook User

    Reputations:
    444
    Messages:
    2,510
    Likes Received:
    0
    Trophy Points:
    55
    My HDD (250 GB 7200 rpm) shows up as ST9250421ASG on the Device Manager. Just to remind you, it is about as noisy as the E6400 fan on its slowest speed, and doesn't bother me much.
     
  3. GoodBytes

    GoodBytes NvGPUPro

    Reputations:
    742
    Messages:
    3,108
    Likes Received:
    1
    Trophy Points:
    106
    Ohh.. about removing the bezel... it snaps can breaks.. read carefully the service manual on how to do it to prevent it. Well if you have accidental protection... get you your flame torch ;) j/k
     
  4. GoodBytes

    GoodBytes NvGPUPro

    Reputations:
    742
    Messages:
    3,108
    Likes Received:
    1
    Trophy Points:
    106
    Yes you can, but it's harder... also it might slip and hit the keyboard and break a key. Make sure your hands are well hydrated... as you don't want to scratch the screen with some dry skin... you never know... it's all I can say.
     
  5. chunglau

    chunglau Notebook Evangelist

    Reputations:
    11
    Messages:
    509
    Likes Received:
    0
    Trophy Points:
    30
    More platters make the HDD slower? :)

    Well, maybe you should argue with the Seagate engineers. Here is what they say:

    ***
    The number of discs present in an HDA also affects acoustics. Generally, when there are more discs, the acoustics are higher. Quietest drives are generally single-disc drives. Seagate currently specs acoustics for an entire family (regardless of number of discs), resulting in a worst-case number for publication. Competitors are touting single-disc best-case numbers in their press and sales tools. Seagate plans to start publishing acoustics specs for each product capacity, which will result in fair and comparable specifications.
    ***

    http://www.seagate.com/support/kb/disc/tp/acoustics.html
     
  6. chunglau

    chunglau Notebook Evangelist

    Reputations:
    11
    Messages:
    509
    Likes Received:
    0
    Trophy Points:
    30
    I would say that two people may not always agree whether a HD is noisy. If you are used to a noisy drive on your old laptop, the E6400 may sound silent, despite the fact that it really is not. Best way is to compare a 7200 rpm drive against a smaller 5400 rpm drive. The difference is easy to notice. But in an absolute sense, the E6400 with a 7200 rpm drive is still a quiet machine.
     
  7. chunglau

    chunglau Notebook Evangelist

    Reputations:
    11
    Messages:
    509
    Likes Received:
    0
    Trophy Points:
    30
    Read this article:

    http://www.seagate.com/support/kb/disc/tp/acoustics.html

    The Seagate specs may be the same for all members of a family, but that does not mean that the actual performances are the same.

    The quietest drives as tested by SilentPC.com are single-platter drives.
     
  8. chunglau

    chunglau Notebook Evangelist

    Reputations:
    11
    Messages:
    509
    Likes Received:
    0
    Trophy Points:
    30
    That is exactly my experience, too. I have the same drive.

    The other thing I notice is that the Seagate 7200 drive feels a little warmer than the 5400 rpm drives. I have tried both the Seagate and WD 5400 rpm drives in the E6400 to come to that conclusion.
     
  9. GoodBytes

    GoodBytes NvGPUPro

    Reputations:
    742
    Messages:
    3,108
    Likes Received:
    1
    Trophy Points:
    106
    I follow what storagereview.com says.
    I trust them more than a company that tries to sell they clicking HDD's. :)

    Single and smaller platters are faster, as it's faster to access to the data... As access time it lower.
     
  10. Sir Punk

    Sir Punk Notebook Deity

    Reputations:
    0
    Messages:
    1,061
    Likes Received:
    3
    Trophy Points:
    56
    I can't fine the optimized settings for increased battery life, I know they are somewhere in this thread:

    - BT, wireless off
    - Brightness down
    - vista power plan to low

    - I also have rmclock but doesn't seem to reduce that much, maybe 10 minutes. Am I missing something else?
     
Loading...
Thread Status:
Not open for further replies.

Share This Page